C. Crane CC Witness Instruction Manual page 11

}
RESET BUTTON
The RESET Button has 2 functions:
a. Soft Reset – This function is useful in the unlikely
case that the CC Witness malfunctions or "freezes".
Previous settings will not be erased.
i. Press the reset button one time quickly.
ii. The CC Witness will cycle to power-off, and then
cycle to power-on again.
b. Hard Reset – This function is useful to solve mal-
functions that the "Soft Reset" is unable to repair.
Except for time and date, all previous settings will
be reset to factory defaults. All files on the internal
memory will be erased.
i. With the LOCK switch in the "up" position, press
and hold the BACK button.
ii. While continuing to hold in the BACK button,
press and release the RESET button.
iii. Continue to hold the BACK button until "Format
Please Wait ... " is displayed, then release. For-
matting takes about one minute to complete.
iv. When formatting is finished, position the LOCK
switch to the "down" position before using.
q
RIGHT SPEAKER
CC Witness
Buttons and Components
w
VOLUME + – BUTTON
The VOLUME + – Button has 30 levels of loudness.
Press and release or press and hold "+" to increase or
"–" to decrease the volume.
e
LOCK SWITCH
The LOCK SWITCH has two positions: If moved to the
"up" position, then the CC Witness will be locked and all
buttons will be disabled. This feature is used to prevent
buttons from being accidentally pressed during travel or
storage. If a button is pressed while locked, the time and
date will be displayed, along with the "Lock Switch ON"
message. See page 14.
r
MIC
The internal microphone is used to make voice record-
ings.
t
MIC/LINE IN JACK
This jack is used to record from an external source such
as a CD player, radio, or external microphone. Choose
between using a MIC or LINE IN source. See page 21.
y
LEFT SPEAKER
Page 11