User Guide Insignia ATX 400 and ATX 520 Watt Power Supplies NS-PCW4050/NS-PCW4050-C NS-PCW5250/NS-PCW5250-C Before using your new product, please read these instructions to prevent any damage.
Cooling fan Caution (for NS-PCW4050/NS-PCW4050-C only): Check the red power supply voltage switch setting before installation. The setting should be the same as your local power voltage (115 V for North America and 230 V for Europe and other countries).
Canada, Japan, and others, and 230 VAC for Europe, Southeast, Asia, and others). The NS-PCW5250/NS-PCW5250-C is only compatible with 115 VAC. 3 For NS-PCW4050/NS-PCW4050-C only: Make sure that the red voltage switch (located on the back of the power supply) is set to the correct voltage setting.
Note: For more information, refer to your computer’s user guide. • If you have the NS-PCW4050/NS-PCW4050-C, make sure that the red voltage switch (located on the back of the power supply) is set to the correct voltage setting.
Any case fans, then try again. loose power cable connections may cause the • If you have the NS-PCW4050/NS-PCW4050-C, power supply to operate incorrectly. make sure the power switch (I/O) on the back of the power supply is set to ON (I).
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT Insignia and are not returned to you. If service of Products or APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL parts are required after the Warranty Period expires, you must RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY pay all labor and parts charges.