Chapter 3 Basic Operations - Basic operations by using the remote control
Using the digital zoom function
(Only for still image-based computer (RGB) and still image-based HDMI signals input)
You can enlarge the center area. You can also change the location of the area to be enlarged.
buttons
1)
Press the <D.ZOOM +> or < D.ZOOM -> button on the remote control.
f The [D. zoom] individual adjustment screen is displayed.
f Press asqw on the remote control to move the display position during zoom in.
[D.zoom] individual adjustment
screen
While the screen is displayed and the
image is expanded.
Note
f When the input signals change during [D. zoom], the adjusted value of the digital zoom will be cancelled.
f When no signal input, the key operation is invalid and the icon
f You can also press asqw buttons on the control panel to move the display position during zoom in.
Controlling the volume of the speaker
You can adjust the volume of the audio output from the build-in speaker and the <VARIABLE AUDIO OUT> terminal.
buttons
1)
Press the <VOLUME +> or <VOLUME -> button on the remote control.
<VOLUME +>
<VOLUME ->
Switching the image mode
This function allows you to switch the image mode.
button
1)
Press the <IMAGE> button on the remote control.
f It will switch each time you press the button, [Dynamic] → [Standard] →[Cinema] → [Blackboard(Green)] →
[Colorboard] → [User image] → [Dynamic] →....
Note
f For details, please refer to the [Color adjust] menu → [Image mode] (x page 51).
Using the mute function
This button allows you to turn off the audio output temporarily.
button
1)
Press the <MUTE> button on the remote control.
f The audio turns off.
40 - ENGLISH
Operation
Press the <D.ZOOM +> button. Increases magnification.
Press the <D.ZOOM -> button. Decreases magnification.
Press the as buttons.
Press the qw buttons.
Increases the volume.
Decreases the volume.
Adjustment
Moves the area to the top
or the bottom.
Moves the area to the left
or the right.
will appear.
Adjustment range
0 ~ 33
--