(band 2) antenna, and spring terminal block for an AM loop The Z132 should not be installed in a built in situation such as a antenna (supplied). In addition the Z132 has a Smart My-Link®...
When you unfold the wire antenna you will note that it is in the is turned OFF if the Z132 is not going to be used for an extended form of a “T”. The “crossbar” portion of the T should be stretched period of time.
1 Standby 4 Tune up and tune down When the Z132 is plugged into a live wall socket and the POWER These buttons are used to set the frequency in MANUAL, switch is turned ON, it will power up in “standby” mode and the PRESET and SEARCH modes.
Page 5
Station Name feature. ON TUNE indicator illuminates – which indicates accurate tuning. In the AM band there will be no programme sound when the Z132 NOTE: “Station Name” is not displayed while a preset is being is set one step off tune. The frequency can also be entered programmed.
STANDBY. The handset keys allocated to control of the tuner are as follows: It is possible to switch only the Z132 into or out of by pressing and holding down the “TUN” key and then simultaneously pressing the Preset, Manual and Search (PST, MAN, SCH) STANDBY key.
Press open/close on the CD player (or the remote control) and both the CD player and amplifier will switch out of standby (if The wire antenna supplied with the Z132 may provide adequate necessary) and the CD drawer will open. The amplifier will reception of strong FM signals.
Page 8
Stortford Hall Industrial Park, Dunmow Road Bishops Stortford, Hertfordshire, CM23 5GZ www.armourhe.co.uk This symbol means do not dispose of as municpal waste. Re-use or recycle wherever possible. Electrical/Electronic Equipment may contain substances harmful to the environment. For environmentally sound methods of disposal, please contact your local government agency.
Need help?
Do you have a question about the Z132 and is the answer not in the manual?
Questions and answers