Advertisement
Care and Maintenance
Filter Replacement
1. Turn off and unplug the unit.
2. Hold the Air Purifier main body with one
hand. Open the front cover from the top with
the other hand until feeling a click. Detach
the cover from the main body.
3. Remove the used filters (including both the
active-carbon filter and 3M HAF filter).
4. Fit the replacement filters to the Air Purifier
with the 3M HAF filter facing the body of the
unit. Press the edges of the filters slightly to
ensure untreated air cannot pass through
the edge of the filters during operation.
5. Replace the cover.
6. Plug into a power socket. The unit is ready
to continue operation.
Cleaning
This Air Purifier requires regular cleaning and removal of dirt to maintain proper
operation. To clean:
1. Always disconnect the cord from the electrical outlet.
2. Use a soft and clean cloth to wipe the outside of the machine. Never use
excessive water, strong or corrosive detergent to clean the machine. Gently wipe
the surface, particularly the front shell, air inlet and outlet vents.
3. If you wish to clean the inside of the Air Purifier, use only a clean, dry and soft
cloth to wipe it down. Please do not attempt to clean the ionizer needle because
it may be damaged and/or cause the ionizer to malfunction.
4. Store the fan in a clean dry place when not in use.
Omega Altise products are distributed in Australia by MEA,
(A Division of Hagemeyer Brands Australia Pty Ltd)
ABN 28 001 375 686
Locked Bag 4013, Kingsgrove NSW 2208
Phone: 1300 739 033
Fax: 1800 838 899
Email: customerservice@meaappliances.com.au
Web: meaappliances.com.au
5
omega altise
Advertisement
