One Key Arming - Cyber Suite LED Keypad User Manual

1. Press the bypass
CODE].
2. Press and hold the bypass
last settings will be loaded. You may change these
settings if required.
3. Press the enter
and exit.
4. Press the clear
changes.

ONE KEY ARMING

One key arming can be used to arm the system in regular,
force, stay and instant arming modes. You can use this
feature to allow specific individuals like service personnel
(i.e. cleaners) to arm without giving them access to any
other alarm system operations.
One key arming MUST be enabled by your
property manager or installation company.
Refer to the system configuration table on
page 26.
CyberSuite™ LED Keypad User Manual
key then enter your [USER
key for 2 seconds the
key to store the bypass settings
key to exit without making
20