Husqvarna DXR-310 Operator's Manual page 39

After the fi rst 100 hours
Change
After the fi rst 100 hours the following maintenance should be carried out, subsequently every 1,000 hours.
Slew motor, slew reduction gear unit - oil change
Drive motor, drive gear – oil change
250 hours service
Carry out the weekly service as per the service schedule before you perform the 250 hours service.
Mountings
Drive motor, drive gear
Slew motor, slew reduction gear unit
Gear ring rotation
Level check
Slew motor, slew reduction gear unit
Function
Drive motor, drive gear
Slew motor
Gear ring
Miscellaneous
Hydraulic pump – checking of unusual sounds
Hydraulic hammer – checking of bushing and wrecking bar
500 hours service
Carry out the 250 hours service as per the service schedule before you perform the 500 hours service.
Change
Hydraulic fl uid
Oil fi lter
Air fi lter
Servo fi lter and pressure steering fi lter
1,000 hours service
Carry out the 500 hours service as per the service schedule before you perform the 1,000 hours service.
Change
Slew motor, slew reduction gear unit - oil change
Drive motor, drive gear – oil change
MAINTENANCE AND SERVICE
Contact your service workshop
Contact your service workshop
Contact your service workshop
Contact your service workshop
Contact your service workshop
39
English -