LG LFC23760 Series Owner's Manual page 28

9. CONNECT PIPE TO REFRIGERATOR
NOTE: Before making connection to refrigerator, make
sure it is not connected to any energy source. If your
refrigerator does not have a water filter, it is advised to
install one. If your water source contains sand or related
particles that can travel to the valve, install a water filter
near the refrigerator.
Important: Never use old or used hoses. Always use new
ones to have a better use and experience. Connect
always to a potable water source to avoid security and
health issues.
Remove the ring plug (1) from the valve located at the
top of such device.
Place compression nut and the ferule at the end of the
pipeline. Insert pipeline into the connection valve as far
as possible. Hold tightly while holding pipeline.
Hold on to the pipe from the handles or grabbers located
behind the refrigerator, loosing first the bolt holding the
handle. Afterwards, insert pipe into the hole and tighten
bolt to finalize.
CONNECTING THE WATERLINE
1
Compression
Nut 1/4 "
Ferule
10. OPEN THE BYPASS VALVE
Tighten all connections
containing leaks. Place
access cover back on
compressor.
11. CONNECT TO REFRIGERATOR
Fix pipeline in a way that
it does not vibrate on the
refrigerator or wall. Push
refrigerator against wall.
12. TURN ICEMAKER ON
Turn icemaker switch into the ON position. Icemaker
will start only after reaching its operating temperature
of 15 °F (-9 °C) or less. It will automatically begin the
ice production if switch is located in the ON position.
31