D-Link xStack DES-3200 Series Installation Manual page 10

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch Hardware Installation Guide
The front panel of the DES-3200-28 switch consists out of the following:
 Twenty-four 10/100Mbps Copper Ports
 Two Combo 10/100/1000Mbps Copper / 100/1000Mbps SFP ports
 Two 100/1000Mbps SFP Ports
 One RJ-45 Console Port
 LEDs for Power, Console, Link/Act for port 1 to 24, and Link/Act/Speed for port 25 to 28
The front panel of the DES-3200-28F switch consists out of the following:
 Twenty-four 100Mbps SFP Ports
 Four Combo 10/100/1000Mbps Copper / 100/1000Mbps SFP Ports
 One RJ-45 Console Port
 LEDs for Power, Console, Fan, Link/Act for port 1 to 24, and Link/Act/Speed for port 25 to 28
The front panel of the DES-3200-28P switch consists out of the following:
 Twenty-four 10/100Mbps Power over Ethernet Copper Ports
 Two Combo 10/100/1000Mbps Copper / 100/1000Mbps SFP ports
 Two 10/100/1000Mbps Copper Ports
 One RJ-45 Console Port
 Link/PoE button
 LEDs for Link, PoE, Power, Console, Fan, Link/Act for port 1 to 24, and Link/Act/Speed for port 25 to 28
The front panel of the DES-3200-28/ME switch consists out of the following:

Twenty-four 10/100Mbps Copper ports

Two Combo 10/100/1000Mbps Copper 100/1000Mbps SFP ports, Two 100/1000Mbps SFP ports

One RJ-45 Console port

One Alarm Connector

LEDs for Power, Console, Alarm, and Link/Act/Speed for each port
Figure 1-6. Front Panel of the DES-3200-26-DC
Figure 1-7. Front Panel of the DES-3200-28
Figure 1-8. Front Panel of the DES-3200-28F
Figure 1-9. Front Panel of the DES-3200-28P
4