Advertisement
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
For the Customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
WARNING
- TO AVOID CHOKING HAZARD, KEEP OUT OF REACH OF
CHILDREN.
- DO NOT INSERT THIS CARD INTO ANY MEMORY CARD
SLOT FOR WHICH IT WAS NOT INTENDED.
• For the details of this memory card, please refer to the following URL or the
product instruction manual of the compatible products.
• For more information on download software, please refer to the following
URL.
http:/ /www.sony.net/memorycard/
Precautions on Use
• Please do not use or store this memory card in any environment exceeding
the range of specified operating environment described below.
Abuse or misuse will invalidate product warranty.
Identifying parts
[8]
Write-protect switch
I
Sony shall not be responsible for any damage to or loss of recorded data.
I
Operating voltage
Operating environment
Dimensions (W x L x T)
Mass
2.7 V to 3.6 V
-25 octo +85 oc (-13 °F to +185 °F)
(non -condensation)
Approx. 24
x
32
x
2.1 mm
(31/32
X
1 9/32
X
3/32
in.)
Approx. 2 g (0.07 oz)
Design and specifications are subject to change without notice.
SD and SDHC Logos are trademarks of SD-3C, LLC.
Advertisement
