Related Manuals for Onq 363445-01
Summary of Contents for Onq 363445-01
- Page 1 ELECTRONIC COMMUNICATING THERMOSTAT COOL AUTO Owner's Manual 363445-01 Single Stage Heat/Cool Document Number 889156 Rev B December, 1999...
- Page 2 Copyright 1999 HAI All Rights Reserved...
-
Page 3: Table Of Contents
CONTENTS INTRODUCTION................... 1 DESCRIPTION....................1 MAINTENANCE .................... 1 OPERATION ....................2 DISPLAY......................4 FILTER REMINDER..................6 ANTICIPATION..................... 6 SETTING THE CURRENT TIME AND DAY..........7 PROGRAMMING................. 7 SETTING TIME SCHEDULES..............9 DAY/NIGHT MODE ................10 SYSTEM MODE ................. 11 AUTOMATIC TIME UPDATE............11... - Page 4 This thermostat is Listed by Underwriter's Laboratories and UL Canada. This thermostat has been tested and found to comply with the requirements of the European Union for Electromagnetic Interference, Electromagnetic Immunity and Safety under the applicable EMI and Low Voltage Directives and Standards. This thermostat has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
-
Page 5: Introduction
Please keep this manual on file for future reference. DESCRIPTION The 363445-01 is a precision digital thermostat for single stage heating and cooling systems. It has the capability of being controlled both locally and by remote control. It offers programmability, stand- alone operation, and robust, optically isolated communications with automation systems, utility control systems, and personal computers. -
Page 6: Operation
OPERATION To take advantage of all the benefits and features offered by your thermostat, we recommend that you start by becoming familiar with its operation. COOL AUTO 1- Display The Display is used to show current time, temperature, outdoor temperature (optional), mode, and to give useful information that will guide you through normal operation of your thermostat. - Page 7 4- Mode Press the Mode key to set the thermostat mode to Off, Heat, Cool, or Auto. In Off mode, the heating and cooling systems are both off and do not respond to changes in temperature settings. In Heat mode, the heating system responds to maintain your desired heating setting.
-
Page 8: Display
DISPLAY The following icons will be displayed during normal operation: HOLD MORN DESIRED OUTSIDE NITE OFF COOL REMOTE HEAT AUTO 1- Temperature Display Shows the current temperature, desired temperature, or heating and cooling settings. 2- Time Display Shows the current time of day. DESIRED DESIRED is displayed when the temperature display shows the desired temperature setting. - Page 9 " " " " " " " " is displayed when the heating or cooling system is running. COOL COOL is displayed when the system is in Cool mode. AUTO AUTO is displayed when in automatic changeover mode. HEAT HEAT is displayed when the system is in Heat mode. FAN is displayed when the fan is set to run continuously.
-
Page 10: Filter Reminder
FILTER REMINDER Your thermostat logs the amount of time your heating and cooling system has been running and gives you a reminder when it's time to replace your filter. " F I L " will be displayed every four seconds in the place of the time display when it is time to change you filter. -
Page 11: Setting The Current Time And Day
SETTING THE CURRENT TIME AND DAY To set or change the current time and day, press and release the Prog key. The hour will blink. ∧ ∨ − ) to change the hour. Use the arrow keys ( 2. Press the Prog key to advance to minutes. ∧... -
Page 12: Programming
PROGRAMMING Your thermostat may be programmed to adjust the heating and cooling settings up to 4 times per day (MORN, DAY, EVE, and NITE). You can setup a temperature time schedule for weekdays, Saturday, and Sunday. To enter programming mode, press the Prog key 4 times. When in programming mode: The item that is being programmed will flash. -
Page 13: Setting Time Schedules
SETTING TIME SCHEDULES To view or change the programming time schedules of your thermostat, press and the Prog key four times. The weekday MORN time will flash. ∧ ∨ − ) to change the scheduled time for the 1. Use the arrow keys ( displayed period (MORN, DAY, EVE, or NITE). -
Page 14: Day/Night Mode
Repeat steps 1-6 for the DAY, EVE, and NITE periods. Afterwards, repeat steps 1-6 for 4 daily periods on Saturdays (Day 6), and 4 daily periods on Sundays (Day 7). The temperature display will show "6" for Saturdays, and "7" for Sunday times. Note: If Programming Mode is not being used and Day/Night Mode is being used, only the Weekday - DAY and NITE... -
Page 15: System Mode
SYSTEM MODE Your thermostat can be connected to an automation system or personal computer. With network software, the remote system can send commands to the thermostat to change mode, cool setting, heat setting, status of fan and hold, and other items. "REMOTE"... - Page 16 TIME SCHEDULES The table below shows the time schedules that are currently set into your thermostat. There is a blank table at the bottom that can be used to plan changes to the current schedule. WEEKDAYS SATURDAYS SUNDAYS MORN 6:00 AM 8:00 AM 8:00 AM COOL...