Fujitsu ESPRIMO P5635 Operating Manual page 36

Troubleshooting and tips
Cause
Wrong monitor has been set under
Window XP
Wrong setting for the monitor under
Windows Vista
Wrong setting for the monitor under
Windows 7
The wrong RAM memory modules
have been inserted.
28
Troubleshooting
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu or the
menu for selecting the operating system appears.
► If the menu for selecting the operating system
appears, press F8 .
► Select Safe Mode or Safe Mode with Network.
► Set the correct values for the connected monitor as
described in the operating manual of the monitor by
selecting Start - Settings - Control Panel - Display and
then the Appearance, Themes, Settings tabs.
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu or the
menu for selecting the operating system appears.
► If the menu for selecting the operating system
appears, press F8 .
► Select Safe Mode or Safe Mode with Network.
► Set the correct values for the connected monitor, as
described in the operating manual of the monitor, by
selecting Start (Settings) - Control Panel - Display -
Settings.
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu or the
menu for selecting the operating system appears.
► If the menu for selecting the operating system
appears, press F8 .
► Select Safe Mode or Safe Mode with Network.
► Select Start – Control Panel – Appearance and Themes
– Display to set the correct values for the connected
monitor, as explained in the monitor instructions.
► See the manual for the mainboard for information on
which memory modules can be used.
A26361-K1006-Z220-1-7619, edition 2