GoSpeak SMK-Link’s User Manual

Thank You
Thank you for purchasing SMK-Link's GoSpeak!™ Pro ultra portable speaker system.
This User's Guide is designed to help guide you through setting up your GoSpeak!
Pro ultraportable speaker system. The process of setting up your GoSpeak! Pro is
an easy step-by-step process. Should you need additional help, we have the following
additional resources:
Additional help and resources www.smklink.com
Toll free technical support 888-696-3500
Free email technical support pcsupport@smkusa.com

Safety Information

WARNING: To reduce the risk of fire or electrical shock, do not
expose the system to rain or moisture.
WARNING: To reduce the risk of electric shock, do not disassemble
this system unless you are qualified. Refer servicing to qualified
service personnel.
The lightning flash with arrowhead symbol within an equilateral
triangle alerts the user to the presence of uninsulated, dangerous
voltage within the system enclosure that may be of sufficient
magnitude to constitute a risk of electrical shock.
The exclamation point within an equilateral triangle, as marked on
the system, is intended to alert the user to the presence of impor-
tant operating and maintenance instructions in this owner's guide.
CAUTION: Make no modifications to the system or accessories.
Unauthorized alterations may compromise safety, regulatory compli-
ance, and system performance.
CAUTION: Do not place any naked flame sources, such as lighted
candles, on or near the apparatus.
CAUTION: Where the mains plug is used as the disconnect device,
such disconnect device shall remain readily operable.
WARNING: Do not expose this apparatus to dripping or splashing
and do not place objects filled with liquids, such as vases, on or near
the apparatus As with any electronic products, use care not to spill
liquids into any part of the system. Liquids can cause a failure,
electric shock, and/or a fire hazard.

Additional Safety Instructions

1. Read these instructions. the point where they exit from the
2. Keep these instructions. apparatus.
3. Heed all warnings. 11. Only use attachments/accessories
4. Follow all instructions. specified by the manufacturer.
5. Do not use this apparatus near water. 12. Unplug this apparatus during lightning
6. Clean only with a dry cloth. storms or when unused for long periods
7. Do not block any ventilation openings. of time.
Install in accordance with the manufacturer's 13. Refer all servicing to qualified service
instructions. personnel. Servicing is required when
8. Do not install near any heat sources, the apparatus has been damaged in any
such as radiators, heat registers, stoves, way, such as power-supply cord or plug
or other apparatus (including amplifiers) is damaged, liquid has been spilled or
that produce heat. objects have fallen into the apparatus,
9. Do not defeat the safety purpose of the the apparatus has been exposed to rain
polarized or grounding-type plug. A or moisture, does not operate normally,
polarized plug has two blades with one or has been dropped.
wider than the other. A grounding-type 14. To prevent risk of fire or electric shock,
plug has two blades and a third grounding avoid overloading wall outlets, extension
prong. The wider blade or third prong cords, or integral convenience receptacles.
is provided for your safety. If the provided 16. See product enclosure for safety-related
plug does not fit into your outlet, markings.
consult an electrician for replacement of 17. Use proper power sources – Plug the
the obsolete outlet. product into a proper power source, as
10. Protect the power cord from being described in the operating instructions or as
walked on or pinched, particularly at marked on the product.
plugs, convenience receptacles, and
Agency Certifications
USA - FCC CFR 47 Part 15, Subpart B This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation. This equipment has been tested and found to comply with
the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
* Consult the dealer or an experienced radio/TV technician for help.
Operation with non-approved equipment is likely to result in interference to radio and TV
reception. The user is cautioned that changes and modifications made to the equipment without
the approval of manufacturer could void the user's authority to operate this equipment.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Canada - ICES-003 This Class B digital apparatus complies with Canadian ICES-003. Operation
is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation
of the device.
European RoHS DIR 2002/95/EC
Waste electrical and electronic products must not be disposed of with household
waste. Please recycle where facilities exist. Check with your Local Authority or
Retailer for recycling advice.
TM
User's Guide