Subscribe to Our Youtube Channel
Summary of Contents for Stelpro STW Series
- Page 1 User’s guide “STW” series Towel warmer This unit complies with the CSA standards For further information or to consult this guide on line, please visit our Web site. INSSTW0208...
- Page 2 WARNING WARNING WARNING WARNING Before installing and operating this product, the user and/or installer must read, understand and follow these instructions and keep them handy for future reference. If these instructions are not followed, the warranty will be considered null and void and the manufacturer deems no further responsibility for this product.
-
Page 3: Specifications
SPECIFICATIONS TOWEL WARMER MODELS STW3252 STW5002 WATTS 325/250 W 500/375 W VOLTS 240/208 VAC 240/208 VAC AMPERES 1.35/1.2 A 2.08/1.8 A WEIGHT 11.5 lb / 5.2 kg 16.5 lb / 7.5 kg WIDTH 20 7/16” / 520 mm 20 7/16” / 520 mm HEIGHT 28 3/8”... - Page 4 INSTALLATION IN A DRYWALL 5- Screw the driller toggles (included) into the two previously marked holes. If needed, use a hammer. (Please refer to the images hereof to understand how to use this product). Insert the screws in the supplied molded washers and insert these latter into the mounting brackets. Then, screw the mounting brackets into the driller toggles installed at the preceding step.
-
Page 5: Operation
OPERATION A = Yellow indicator B = Thermostat C = Indicator D = Timer E = Red indicator F = On/Off switch Using the product The towel warmer is equipped with an On/Off switch (F); when the unit is powered, the red indicator (E) lights up and the operating status depends on the posi- tion of the thermostat (B). -
Page 6: Troubleshooting
Stelpro reserves the right to examine or to ask one of its representatives to examine the product itself or any part of it before honoring the warranty. Stelpro reserves the right to replace the entire unit, refund its purchase price or repair a defective part.
Need help?
Do you have a question about the STW Series and is the answer not in the manual?
Questions and answers