Cabinet Disassembly Instructions - Philips 40PFL5505D/F7 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
[1] Stand
Assembly
[2] Rear Cabinet
[3] Speaker-S
[4] Speaker
[5] Stand Bracket
[6] IR Sensor
CBA Unit
[15] Side Holder
[8] Front Flare
(L),(R)
[12] Power Supply
CBA Unit
[13] PCB Holder
(D),(U)
[14] Wall Mount
Bracket(L),(R)
[16] LCD Module
Assembly
[17] Front Cabinet
Assembly
2. Disassembly Method
Step/
Loc. Part
Fig.
No.
No.
Stand
[1] D1 4(S-1)
Assembly
Rear
[2] D1 15(S-2), 3(S-3)
Cabinet
[3] Speaker-S D2 2(S-4), Desolder
D2 4(S-5), *CN3801,
[4] Speaker
D5 *CN3802
Stand 2(S-6), 4(S-7), (S-8),
[5] D2
Bracket *CN1, AC Inlet Holder
IR Sensor D2
[6] *CN4051, *CN4052
CBA Unit D5
Function D2 Function Knob,
[7]
CBA Unit D5 Knob Frame
[7] Function
CBA Unit
[9] Shield Box
[10] Digital Main
CBA Unit
[11] Jack PCB
Holder
Removal
Remove/*Unhook/
Unlock/Release/
Note
Unplug/Unclamp/
Desolder
---
---
---
---
---
---
---
Step/
Loc. Part
Fig.
No.
No.
[8] Front Flare D2
[9] Shield Box D3
Digital Main D3
[10]
CBA Unit D5
Jack PCB
[11] D3 4(S-15), 2(S-16)
Holder
Power
D3
[12] Supply CBA
D5
Unit
PCB Holder
[13] D4 6(S-18)
(D),(U)
Wall Mount
[14] Bracket D4 4(S-19)
(L),(R)
Side Holder
[15] D4 2(S-20), 4(S-21)
(L),(R)
LCD
[16] Module D4 ---------------
Assembly
Front
[17] Cabinet D4 ---------------
Assembly
↓ ↓ ↓
(1) (2) (3)
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following "Reference Notes in the
Table."
4-1
Removal
Remove/*Unhook/
Unlock/Release/
Note
Unplug/Unclamp/
Desolder
8(S-9), Boss(T),
Boss(W)
(S-10), (S-11),
10(S-12), (S-13),
2(H-1), Jack Holder(A),
Jack Holder(B)
6(S-14), *CN3002,
*CN4901, *CN4902
11(S-17), *CN4
↓
(4) (5)
PL10.4DC
---
---
---
---
---
---
---
---
---
---
↓