Chapter 2. Adjustments; Adjustments Sharp Program Support Tool (Spst) - Sharp GX10i Service Manual

CHAPTER 2. ADJUSTMENTS

[1] Adjustments
SHARP Program Support Tool (SPST)
1. Outline
This document provides user information required to install and use GX10i Program Support Tool (SPST).
2. System requirements
• IBM PC compatible personal computer (standard COM1 serial port (115,200 bps) and USB required)
Supporting OS: Windows 98/98SE/2000/XP (except for Windows 95/ME/NT)
(English, German, Italian, Spanish, French and Chinese versions)
• Data cable
• Full charged battery
<During RF adjustment>
• RF test instrument: CMU200, CMD55
• GPIB interface: National Instruments USB-GPIB cable
Model No.: NI GPIB-USB-B
• The battery should be fully charged.
3. Introduction
3.1 Functions
SPST offers five key functions:
1. Software download
2. User data transfer (processes all data at once but not individually)
3. RF calibration
4. Default setting
5. Identification
SPST functions as a launcher for these independent software programs.
3.2 Installation
The SPST software is distributed in CD-ROM format.
(1) Use Windows Explorer and copy "UpgradingTool.zip" and "SPST.zip" to the desktop.
(2) Unzip and install "UpgradingTool.zip" following the procedures below.
(3) Unzip the "SPST.zip".
Hereinafter, procedures are carried out in the SPST folder.
3.2.1 Starting up
Connect GX10i to an operable serial port of the PC with the supplied data cable. Connect the AC charger to the data cable.
Execute the GX10i SPST.exe program in the SPST folder.
(1) The SPC input screen appears. Input SPC (2968) and press "OK".
If you do not know SPC, press "Cancel" to close.
CONFIDENTIAL
Figure 1
2 – 1
GX10i