Table of Contents Introduction Thank you for purchasing DIG’s LEIT WWS (with wind sensor) or LEIT WWSE A. Introduction ………………………………………………………………… 3 (without wind sensor) wireless, ambient light (solar) powered weather station, which operates as a part of the LEIT-2ET wireless, ambient light (solar) B.
IMPORTANT: Communication between the LEIT RC2ET handset, the This device is required to comply with FCC RF exposure requirements for LEIT-2ET controller, the LEIT WWS and the LEIT WWSE weather station is mobile and fixed transmitting devices. This model transceiver generates and automatically limited to daylight hours when there is sufficient light energy.
LEIT WWS or LEIT WWSE weather stations. All adjustments and changes must be made at DIG’s facility under the specific guidelines suggested in our • The LEIT WWS and LEIT WWSE weather stations can provide information instruction manual. Any tampering or modification to the equipment will void...
2. Mounting connection: 1” x 12” mounting column and integrated clamp with 1.1 Box Contents two screws (included) 1. Weather sensor model LEIT WWS with wind sensor or LEIT WWSE without 3. 1 1/2” mounting column with a recommended height with a minimum of wind sensor 8 ft (2.4 m) (not included)
In order to establish communication for the first time between a LEIT RC2ET NOTE: Install the LEIT WWS and/or LEIT WWSE at a minimum of 25 ft (8 m) from remote control handset, LEIT-2ET two station weather based ambient light the nearest LEIT-2ET controller.
DIG CORPORATION. There are no warranties which extend beyond the description on the face hereof. In the case of purchase of the product for use other than, for irrigation purposes, DIG CORPORATION hereby disclaims any implied warranties including any warranties of merchantability and fitness for a particular purpose.
Need help?
Do you have a question about the Leit WWS and is the answer not in the manual?
Questions and answers