Page 2
Table of Contents Symetrix Inc. 6408 216th St. SW Mountlake Terrace, WA 98043 USA Tel (425) 778-7728 Fax (425) 778-7727 Email symetrix@symetrixaudio.com Website www.symetrixaudio.com...
Page 4
Operator Safety Summary Chapter 2 Equipment Markings CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF FIRE OR WARNING: ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE RISQUE DE CHOC ELECTRIQUE AVIS: NE PAS OUVRIR SEE OWNERS MANUAL.
Chapter 7 Specifications Architects and Engineers Specifications for the 531E ∞ Specifications for the 531E Number of audio channels Frequency control range 20Hz - 20 kHz Maximum input level +21 dBu balanced (31 bands, ISO 1/3rd octave centers) Maximum output level...
Page 12
Cutoff Frequency Range 6Hz -260Hz In the interest of continuous product improvement, High Cut FilterSlope 12dB/octave Symetrix, Inc. reserves the right to alter, change, Cutoff Frequency Range 3kHz - 65kHz or modify these specifications without prior notice. Graphic eq controls...
Page 13
Chapter 8 Warranty and Service 531E/532E Limited Warranty...
Page 14
Servicing the 531E or 532E (425) 778-7728...
(-) = UNUSED (-) = NOT USED = GROUND = GROUND FROM ELECTRONIC, NON-TRANSFORMER TO UNBALANCED IN FROM BALANCED OUTPUT (TYPICAL OF SYMETRIX PRODUCTS) TRANSFORMER COUPLED OR TO UNBALANCED INPUTS FLOATING BALANCED OUTPUT FEMALE XLR MALE TS PLUG PIN 1 = GROUND + LOW...
Appendix C Declaration of Conformity We, Symetrix Incorporated, 6408 216th St. SW, Mountlake Terrace, Washington, USA, 531E and 532E Graphic Equalizers EN 60065 Safety requirements for mains operated electronic and related apparatus for household and similar general use. EN 50081-1 Electromagnetic compatibility - Generic emission standard Part 1: Residential, commercial, and light industry.
Page 18
Symetrix Inc. 6408 216th St. SW Mountlake Terrace, WA 98043 USA Tel (425) 778-7728 Fax (425) 778-7727 Email symetrix@symetrixaudio.com Website www.symetrixaudio.com...
Need help?
Do you have a question about the 531E and is the answer not in the manual?
Questions and answers