Appendix. CRU (Customer Replaceable Units)
instructions
Note: Make sure the battery has been removed before replacing any devices.
Replacing the battery
Note: Use only the battery provided by Lenovo. Any other battery could ignite or explode.
To replace the battery, do the following:
1 Turn off the computer. Disconnect the AC power adapter and all cables
from the computer.
2 Close the computer display, and turn the computer over.
3 Unlock the manual battery latch
unlocked position to eject the battery pack
the battery pack, pivoting it on the outer edge
in the indicated direction to remove it
4 Install a fully charged battery.
5 Slide the manual battery latch to the locked position.
6 Turn the computer over again.
7 Connect the AC power adapter and the cables to the computer.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
. Slide the spring-loaded latch to the
a
d
d
c
a
. Lift up the inner edge of
b
. Slide the battery pack
c
.
d
b
39