V-Belt Case Drain Plug - Yamaha YFM125GZ Owner's Manual

3
4
1. Screw
2. Gasket
3. Tailpipe
4. Spark arrester
4. Insert the tailpipe into the muffler and align the
screw holes.
5. Install the screws and tighten them.
EWB02340
WARNING
Do not start the engine when cleaning the
spark arrester, otherwise it could cause injury
to the eyes, burns, carbon monoxide poison-
ing, possibly leading to death, and start a fire.
Always let the exhaust system cool prior to
touching exhaust components.
1
2
EBU23930

V-belt case drain plug

After riding in water deep enough to allow it to en-
ter the V-belt case, remove this plug to drain the
water from the case.
TIP
If water drains from the V-belt case after removing
the plug, have a Yamaha dealer check the ATV as
the water may affect other engine parts.
1. V-belt case drain plug
8-23
1
1
2
3
4
5
6
7
8
9
10
11