STRIDE SE-MC2U-ST Datasheet

S
TRIDE
M
SE-MC2U-ST
Description:
STRIDE SlimLine Industrial Unmanaged Ethernet copper to Fiber
Converter with one 10/100BaseT auto-detecting, auto-crossover and
auto-polarity RJ45 Ethernet Port and one 100BaseFX Fiber Optic Port
(multimode fiber connector for links up to 4km, ST or SC type
connector depending on model). Redundant power inputs with surge
and spike protection. DIN rail mounting. Supports store & forward
wire speed switching and full-duplex with flow control. UL, CSA
(CUL), & CE
N N : : D , I
O O T T E E IMENSIONS
SHOWN ON THE BACK OF THIS DATA SHEET
Copper RJ45 Port: (10/100BaseT)
10/100BaseT ports
Protocols supported
Ethernet compliancy
Auto-crossover
Auto-sensing operation
Auto-negotiating
Auto-polarity
Flow control
Ethernet isolation
Plug and play
Cable requirements
Max. cable distance
Fiber Port: (100BaseFX multimode)
100BaseFX ports
Fiber port mode
Fiber port connector
Optimal fiber cable
Center wavelength
Multimode
Nominal max. distance
(full duplex)
Half and full duplex
Ethernet compliance
Eye safety (laser)
™ I
NDUSTRIAL
C
EDIA ONVERTERS
SE-MC2U-SC
W
NSTALLATION AND IRING INFORMATION IS
.
Shielded RJ45
All standard IEEE 802.3
IEEE 802.3, 802.3u, 802.3x
Yes, allows you to use straight-through or crossover wired cables
Yes, Full and half duplex
Yes, 10BaseT and 100BaseT
Yes, on the TD and RD pair
Automatic
1500 VRMS 1 minute
Yes
Twisted pair (Cat. 5 or better) (shielded recommended)
100 meters
1
Multimode (mm)
ST - model SE-MC2U-ST
SC - model SE-MC2U-SC
50/125 or 62.5/125 µm
1300 nm
Links up to 4 km typ.; 1300 nm; use with 50 or 62.5/125 um fiber
> Transmitter power (dB): -21 min, -17 typ, -14 max
> Receiver sensitivity (dB): -34 typ, -31 max
4 km
Full duplex
100BaseFX
IEC 60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11
U
NMANAGED
– D
ATA
N N : : F
O O T T E E OR ADDITONAL
SE-USER-M,
IS AVAILABLE AS A DOWNLAODABLE
O D
NLINE OCUMENTATION AREA OF THE
General Specifications
Ethernet switch type
Operating mode
Devices supported
Standards
MAC addresses
Memory bandwidth
Latency for
10 Mbps ports
Latency for
100 Mbps ports
Power input
Input power
(typical with all ports
active at 100 Mbps)
Input voltage
Reverse power protection
Transient protection
Spike protection
Ethernet isolation
Operating temperature range
Storage temperature range
Humidity
(non-condensing)
Environmental Air
Vibration, shock & freefall
Agency Approvals
EMI emissions
EMC immunity
Hazardous locations
RoHS and WEEE
Packaging and protection
Dimensions (L x W x H)
Weight

Safety Standards:

U L
C US
R
Electrical Safety
WEEE Compliant
1
E
3505 HUTCHINSON ROAD
THERNET
CUMMING, GA 30040-5860, USA
S
HEET
,
PRODUCT DETAILS A USER
PDF
A A D D
U U T T O O M M A A T T I I O O N N I I R R E E C C T T WEBSITE
2 ports
Store and forward wire speed switching, non-blocking
All IEEE 802.3 compliant devices are supported
IEEE 802.3, 802.3u, 802.3x
1024 addresses
3.2 Gbps
16 us + frame time (typical)
5 us + frame time (typical)
Redundant Input Terminals
2.0 W
10-30 VDC (continuous) - Class 2 Power Supply
Yes
15,000 watts peak
5,000 watts (10x for 10 uS)
1500 VRMS 1 minute
-10 to +60 °C (+14 to +140 °F),
cold startup at -10 °C (+14 °F)
-40 to +85 °C (-40 to +185 °F)
5 to 95% RH
No corrosive gasses permitted
IEC68-2-6, -27, -32
UL/cUL 508, CSA C22 per EN61010-1,
UL/cUL 1604 (Class 1, Div. 2, Groups A, B, C, D),
CSA C 22.2/213 9 per EN50021/EN60079-15
(Zone 2, Category 3), CE (ATEX)
FCC part 15, ICES-003, EN55022
IEC61326-1
UL1604, CSA C22.2/213 (Class I, Div.2) (file #E200031);
EN50021/EN60079-15 (Zone2)
RoHS (Pb free) and WEEE compliant
UL94VO Lexan, IP30
See mechanical diagrams for details
4 oz (0.11 kg)
European
US Emissions
Directives
RoHS
RoHS Compliant
,
MANUAL
FILE FROM THE
.