Page 1
Owners Manual: CP820 (Wire-line) Getting started: Connect the phone’s RJ11 phone jack to the local telephone line. Lift hand-set, listen for dial tone, LCD will display “DIAL”. Dial desired number. Phone will dial number and display call amount 5. Deposit coin(s) once other party answers.
Page 2
To enter program mode user must dial the phone number that the CP820 is connected to. This will give a busy signal and will keep the line from disconnecting. Next remove coin box from CP820 and press program button to access program mode.
Page 3
A) Start call Line type select; Line is default leave as is. B) Free call code: Depress the * key until you reach “FREE CALL MODE” enter 4-digit pin once the code has been entered, the LCD displays “CODE IN *As the owner of the payphone you are able to place free calls using the owner’s code.
Page 4
E) Rates and bands: Depress the * key until you reach “Rates,” To change desired tariff, refer to chart. CHART IS AT DEFAULT RATE Band Call Type Free Free calls 50c /untimed Untimed Calls 25c/5min Local Calls 25c/5min Local Calls 25c/5min Toll Calls 25c/5min...
Warranty Policy Warranty Policy G-TEL Enterprises, Inc. - Payphone.com warrants the CP820 to be free from defects in material and workmanship for a period specified on the product information page found at www.payphone.com. This warranty is extended only to the original purchaser. G-TEL shall, at it's option, either repair or replace such products and parts which are defective within the warranty period.
Need help?
Do you have a question about the CP820 and is the answer not in the manual?
Questions and answers