Table of Contents
Related Manuals for BRIO OP465
Summary of Contents for BRIO OP465
- Page 1 TECHNICAL INFORMATION VACUUM CLEANER MODEL OP465 Please make sure that your house installation voltage corresponds to the voltage marked on the appliance. Mains supply: 230 – 240V ~ 50 Hz – AC only Power rating: 1100 Watts INSTRUCTION MANUAL SAVE THESE INSTRUCTIONS...
- Page 2 BEFORE INITIAL USE AND PREPARATION Structure Illustration Carefully unpack the vacuum cleaner and remove all packing material from the appliance. Appropriately dispose of plastic bags and packing materials. These may be a danger risk to small children. Connect the two extension tubes together using the taper lock. Connect the large end of the extension tubes onto the floor brush.
- Page 3 If the vacuum cleaner becomes less efficient than normal, An appliance dropped or damaged should not be used until check the bag full indicator on the top cover. If the indicator examined by a service engineer. is visible when vacuum cleaner is on, the dust bag requires Do not abuse the power cord.
- Page 4 To clean the outer surface of the vacuum cleaner, use a soft damp cloth and dry the appliance afterwards with a dry towel. Ensure that no moisture enters the appliance. Stubborn spots can be cleaned with a cloth moistened with mild liquid detergent.
Need help?
Do you have a question about the OP465 and is the answer not in the manual?
Questions and answers