Copying From Dvd To Vcr; On-Screen Display - Vcr - LG LVC-837 Owner's Manual

Copying from DVD to VCR

You can copy the contents of a DVD to a VHS tape.
1. Insert the disc you wish to copy into the DVD deck
and close the disc tray.
2. Insert a blank VHS video tape into the VCR deck.
3. Find the place on the DVD from which you want to
start dubbing using the PLAY, FF, REW and
PAUSE functions.
For best results, pause playback at the point from
which you want to record.
4. Press the z REC/ITR. The DVD goes into PLAY
mode and the VCR goes into RECORD mode. If
the DVD disc menu appears, you may need to
press PLAY (N) manually to begin copying.
5. When the DVD is finished playing, press STOP (x)
to end copying.
Notes:
• If the DVD you are attempting to copy is copy protected,
you will not be able to copy the disc. It is not permitted
to copy Macrovision encoded DVDs (or Discs). "Lock" is
displayed in the display window.
• You must stop the copy process manually when the DVD
movie ends, or the unit may replay and record over and
over again.
• When you stop the DVD playback during copying, the
recording on VCR is stopped automatically.
On-Screen Displa
On-Screen Displa
Some of these functions will be displayed every time
the DVD+VCR is operated.
PLAY
SP
JAN 1 , MON
TAPE SPEED DISPLAY
FUNCTION DISPLAY
HI-FI DISPLAY
CHANNEL DISPLAY
24
y - VCR
y - VCR
HI-FI CH 4
STEREO
2:15 PM
STEREO/SAP DISPLAY
(MONO is not displayed)
DATE DISPLAY
CLOCK/ COUNT/
REMAIN DISPLAY
Each press of the ENTER/OK changes the TV screen
in the following sequence.
STOP CH 4
SP STEREO
JAN 1, MON 2:15 PM
2:15 PM
Real-Time Counter
If a tape with contents recorded on it is inserted into
the VCR, the real-time counter shows length of the
tape running in hours, minutes, and seconds. Press
CLK/CNT to select the real-time counter display.
Every press of CLK/CNT changes the TV screen as
illustrated below.
2:15 AM
CLOCK COUNTER
Counter Memory
This feature is useful if there is a section of tape you
want to view immediately after recording or if you
want to return to the same point several times.
1. Begin recording or playing a tape.
2. Press CLK/CNT until the real-time counter is dis-
played on the TV screen.
3. At the point that you want to locate later, reset the
real-time counter to "0:00:00" by pressing CLEAR.
4. Continue to play or record.
5. Press STOP (x) when recording or playback fin-
ishes.
6. Press BACKWARD (m). The tape automatically
stops when the tape counter returns to about
"0:00:00".
Tape Remaining
This function displays the amount of time remaining
on the tape during recording or playback. Press
CLK/CNT repeatedly until the REM indicator displays
on the TV screen during recording or playback.
The remaining tape length may not be displayed cor-
rectly depending on the condition of the tape and the
kind of the tape (T-140, T-160, or T-210 etc.).
Notes:
• The function displays can be seen displayed on the TV
screen for 5 seconds.
• The clock (or tape counter, tape remaining) mode will be
displayed until you press ENTER/OK.
• The tape counter and the remaining tape length indica-
tor appear only when a cassette is inserted. Also, the
remaining tape length indicator appears after any tape
operation.
0:35:40
REM 1:58
0:05:25 REM 1:07
REMAINING TIME