Get Started; Connect Power; Turn On And Select A Source; Play Discs - Philips MCM1006 User Manual

3 Get started

Caution
‡
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.

Connect power

Connect the power adaptor to the power
supply socket.

Turn on and select a source

Slide the power switch and source selector to
CD, USB, or FM.
» The LED indicator beside the LCD screen
lights up in red.
‡ To turn off the system, slide it to OFF.
‡ When the power switch and source
selector is not in the "OFF" position and an
MP3 link cable is connected to the MP3-
LINK socket, the system automatically
switches the source to audio input through
the MP3-LINK socket.
8 EN

4 Play discs

1
Slide the power switch and source selector
to CD.
2
Lift the cover of disc compartment.
3
Load a disc with the printed side facing
upwards.
4
Close the cover of disc compartment.
» Play starts automatically after a few
seconds.
‡ If play does not start automatically,
press to start play.

Control play

During play, follow the instructions below to
control play.
Buttons Function
Start or resume
play.
Pause play.
Stop play.
/ Press to skip to
the previous or
next track.
/ Press and hold to
rewind or search
forward fast
within a track.
ALBUM - / Skip to the
ALBUM + previous or next
album when no
less than one
album exists.
LCD displays
the track
number, ,
and
the track
number, , and
(blinking)
the total
number of
tracks and
the track
number, ,
and
the track
number, ,
and
the track
number, ALB,
and