Vga Menu Setup; Vga Setting; Sound - Technika LCD24-620 User Manual

The VGA mode supported up to 1920X1080@75Hz(for 24"), you can use this unit as a
multimedia PC monitor. When this unit works in VGA mode, the following setup can
be done.
Press [SETUP] button to enter main section. Press [
press [ ] button or [OK] button to enter. If all is complete, please press [SETUP] button twice to
exit and your setup data will be saved automatically.
V G A S E T T I N G
Select VGA SETTING item to adjust such
parameters as Contrast, Brightness,
H-offset, V-offset, Frequency, Phase,
Auto Adjust.
NOTE
When your PC goes into standby mode, the screen will show
as right side. This unit will go into sleep mode if no signal
input for 5 minutes. In this mode, the indicator will remain
green, and the screen will turn off. You can wake it up by
waking up your PC or pressing [SETUP] or [SOURCE]
button on the remote control.
S O U N D
Select SOUND item to adjust sound parameters.
You may adjust Sound Mode, Treble, Bass,
Balance, Auto Volume and Surround Sound.
Sound Mode item can be changed between
Music, Film, News, User.
Auto Volume item enables you to adjust Off or On
for control volume automatic.
Surround Sound item enables you to select Off or
On for surround sound.
28

VGA Menu Setup

] button to select sections and then

VGA SETTING

Contrast
Brightness
H-Offset
V-Offset
Frequency
Phase
Auto Adjust
Select
OK

SOUND

Sound Mode
Treble
Bass
Balance
Auto Volume
SurroundSound
Select
24" HD Ready 1080p DVD LCD TV User Guide
75
50
50
50
0
60
Enter Return
SETUP
VGA
NO SIGNAL
1 : 50
Standard
75
50
50
Off
Off
Adjust Return
SETUP