Remove Target (Only If A Target Is Active); Remove Grid (Only If Grid Is Active); Sonar Window (Combo View Only); Waypoint [Name] (Most Recently-Created Waypoint) - Humminbird 398ci SI Combo Operation Manual

Remove Target removes the waypoint target from the display. This menu option
will only appear when a target has already been applied to a waypoint.
NOTE: See Introduction to Navigation: Add a Waypoint Target or Trolling
Grid for more information.
Remove Grid removes the waypoint grid from the display. This menu option will
only appear when a grid has already been applied to a waypoint.
NOTE: See Introduction to Navigation: Add a Waypoint Target or Trolling
Grid for more information.
Sonar Window sets the size of the Sonar Window in the Combo View. Sonar
Window can only be accessed from the Combo View.
Waypoint [Name] allows you to view the waypoints submenu for the most
recently created waypoint. You must have pressed the MARK key at least once
since you last powered up the Fishfinder for this menu option to appear.
NOTE: See Introduction to Navigation and the Humminbird® Waypoint
Management Guide for more information.
Remove Target
(only if a Target is active)
Settings: Press the RIGHT Cursor key to activate.
Remove Grid
(only if a Grid is active)
Settings: Press the RIGHT Cursor key to activate.
Sonar Window
(Combo View only)
Settings: Wide, Medium, Narrow; Default = Medium
Waypoint [Name]
(Most recently-created waypoint)
Settings: Edit, Delete, Go To, Target, Grid
115 Navigation X-Press™ Menu