Operation - Sirius XM RAdio Universal Boombox Installation And User Manual

Operation

Power on the Universal Boombox by pressing the Power/Volume knob on the
front panel. The light on the front panel surrounding the knob should light up blue
to indicate power is on. If the Radio does not power on at the same time, press
the power On/Off button on the Radio. You should now hear the Sirius or XM
audio. If you do not, increase the volume of the Universal Boombox by turning the
Power/Volume knob clockwise (+).
Batteries
If the light on the front panel surrounding the Power/Volume knob should turn
red while the Universal Boombox is powered on, this indicates that the battery
power is low. Replace the batteries.
Using the AUX Input
If you want to listen to an external audio device such as an MP3 player or CD
player through the Universal Boombox, do the following:
1 . Initially set the volume level on the audio device to mid-range.
2 . Connect the output of the audio device to the Aux In connector on the front
panel of the Universal Boombox. Press the source button to select the AUX
input.
3 . Adjust the volume on the audio device to obtain satisfactory audio output
from the Universal Boombox. If the sound is distorted, lower the volume
level on the audio device and increase the volume level on the Universal
Boombox.
Headphones
To listen using headphone, connect your headphones to the Headphone
connector on the front panel of the Universal Boombox.
24