Advertisement
Ver 1.0.0.1
4. Install the netFox AP Software
1) To install netFox AP to your PC for
netFox Wifi/GPS Cameras, please
insert
CD
and
NetFoxSetup.msi
wizard and it can be found on Start
Menu if the installation succeeds.
Viewing Image from Cameras/ Making VoIP Phone Calls/ Doing MAP Searching via GPS
1) Please start the netFox AP software you installed, and netFox will automatically show up on
Camera List if your netFox's basic settings and WIFI connection settings are completed.
(For more details about these settings, please refer to Section 3.1.1 and 3.1.2 of netFox's
user's manual.)
2) To view the camera, click on the checkbox in front of the ID belonging to your desired netFox,
and the image window will pop up at the section below the camera list.
3) To make a VoIP phone call, just right click on the desired entry of netFox on the camera list
and select the Dial function from the pop-up menu.
4) To search for your netFox's position, please install the GPS AP we offer in advance. Execute
the Setup MAP function under the MAP... file menu of netFox AP to locate the
GpsSystem.exe file of the GPS AP you had installed. Then, enable the Run MAP function
for the initiation the GPS MAP function.
NOTE 3: The built-in GPS function works only when netFox is placed in the outdoors. When you power on netFox,
this function will begin to be initiated as well and it will take 15 minutes at least for netFox to locate its
position successfully.
Fig. 2 The Connection of netFox
double
click
the
file.
Follow
the
3
Since 1988
Advertisement
