Advertisement
T T T T T r r r r r anspor
anspor
anspor
anspor
ansport & Stor
Folding your R32
The first step to folding the R32 is to
remove the shock upper support bolt.
Undo the bolt completely, and be sure
not to loose the hardware on the shock
body. Fold the swing arm forward.
If you want the partially folded position for car-top transport,
then stop the swingarm when the hole
in the swingarm brace lines up with the
partial fold hole on the main frame of
the bike. Capture the chain by looping
cable of the chain hanger/locking pin
around the chain, then insert the pin into
the appropriate hole, locking the
swingarm in place.
For tighter storage, allow the swingarm
to move all the way forward, and align
the swingarm brace hole with the fully
folded position hole on the main frame,
then capture the chain and insert the
pin.
Handlebar removal
To get the bike as small as possible for storage or transport, first
fold the swingarm to the fully folded position described above.
Next we need to remove the handlebar riser from the fork steerer.
First, you must disconnect the control cables. This doesn't mean
that you have to unhook the cables from the brakes or derailluers,
you simply have to pop the casings free from the split casing
stops. To do this you need to shift the rear derailleur into the
easiest to pedal gear (largest cog, #1 on the twist grip, be sure to
pedal the bike when shifting the rear derailleur) and shift the in-
14
14
14
14
14
t & Stora a a a a g g g g g e e e e e
t & Stor
t & Stor
t & Stor
11
11
11
11
11
Advertisement
