Table of Contents
Advertisement
(Information): Press this button to
display additional text information relat-
ed to the current FM-RDS or XM station,
or MP3 song.
(Tune): Turn this knob to select radio
stations or, when a CD is playing, to
select a track or MP3 file.
Press the knob to adjust the tone
(bass/treble) or speakers (balance/fade).
BAND: Press this button to switch to
AM; FM; or XM (if equipped). With a CD
or DVD (if equipped) playing, press this
button to switch to the radio.
CD/AUX or DVD/CD/AUX (if equipped):
With the radio playing, press this button
to switch to a CD, DVD (if equipped),
or an auxiliary input device such as a
portable audio player.
FAV (Favorite): Press this button to
go through up to six pages of preset
favorite radio stations. Select a preset
station using the buttons below the radio
display.
EQ (Equalization): Press this button to
select preset equalization settings.
CAT (Category): Press this button to
find XM stations (if equipped) within a
desired category.
Auxiliary Input Jack: A portable audio
player (such as an iPod
can be connected to the auxiliary input
jack located on the radio. Press the AUX
button to begin playing audio from the
player over the vehicle speakers. To
optimize speaker volume, fully increase
the volume on the portable audio player.
Radio Data System
When you tune to a Radio Data System
(RDS) station, the station name and call
letters will appear on the display instead
of the frequency. RDS stations may also
or MP3 player)
®
provide the time of day, a program type
for current programming and the name
of the program being broadcast.
RDS features are available for use only
on FM stations that broadcast RDS
information. RDS relies on receiving
specific information from these stations
and will work only when the information
is available.
Setting the Time
To set the time:
1. Turn on the radio.
2. Press the
(Clock) button. Or, if
equipped, press the MENU button
until the clock option is displayed;
and then press the pushbutton locat-
ed under the clock option label. The
HR, MIN, MM, DD, YYYY labels will
appear on the display.
3. Press the pushbutton under any of
the labels to be changed.
4. Press the pushbutton again, the right
SEEK arrow or the FWD button to
increase the numbers. Press the left
SEEK arrow or the REV button to
decrease the numbers. Rotating the
(Tune) knob also will increase or
decrease the selected label.
5. Press the Clock or MENU button
again to set the currently displayed
time and date.
9
Advertisement
Table of Contents
