Download Print this page

Compaq Rack Keyboard with Hot Keys and Trackball Option Kit Installation Instructions Manual

Rack keyboard with hot keys and trackball option kit

Advertisement

Quick Links

Rack Keyboard with
Hot Keys and Trackball
Option Kit

Installation Instructions

NOTICE
The information in this publication is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE
FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS
CONTAINED HEREIN, NOR FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE
FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. THIS
INFORMATION IS PROVIDED "AS IS" AND COMPAQ COMPUTER
CORPORATION DISCLAIMS ANY WARRANTIES, EXPRESS,
IMPLIED OR STATUTORY AND EXPRESSLY DISCLAIMS THE
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR
PARTICULAR PURPOSE, GOOD TITLE AND AGAINST
INFRINGEMENT.
This publication contains information protected by copyright.
No part of this publication may be photocopied or reproduced
in any form without prior written consent from Compaq
Computer Corporation.
 2000 Compaq Computer Corporation
All rights reserved. Printed in the U.S.A.
Compaq, Registered U.S. Patent and Trademark Office.
Compaq Rack Keyboard with Trackball and Hot Keys Option Kit
First Edition (September 2000)
Part Number 191388-001
Compaq Computer Corporation
191388- 001

Advertisement

loading

Summary of Contents for Compaq Rack Keyboard with Hot Keys and Trackball Option Kit

  • Page 1: Installation Instructions

    Computer Corporation.  2000 Compaq Computer Corporation All rights reserved. Printed in the U.S.A. Compaq, Registered U.S. Patent and Trademark Office. Compaq Rack Keyboard with Trackball and Hot Keys Option Kit First Edition (September 2000) Part Number 191388-001 Compaq Computer Corporation...
  • Page 2: About This Device

    About This Device The Compaq Rack Keyboard with Hot Keys and Trackball is a rack-mounted keyboard in a 1U form factor that provides integrated hot keys for use with Compaq switch box products. This function facilitates easy switching between rack-mounted devices.
  • Page 3 STEP 2 Push the drawer into the rack. STEP 3 Route the keyboard cable as shown in Figure 3. 1 Insert keyboard cable into plastic clip on the cable management spring. a. Open clip b. Insert cable c. Close and secure clip 2 Route cable through the rear of the keyboard drawer and under the rail, fitting it into the notch on the bottom of the rail.
  • Page 4: Installation Is Complete

    STEP 4 Slightly bend the cover to fit over the rear drawer area and snap into place. Installation is complete.
  • Page 5: Cable Locking Mechanism

    Cable Locking Mechanism Cables on the Compaq Rack Keyboard with Hot Keys and Trackball have a locking mechanism to provide a secure cable connection. You must use proper procedures when disconnecting these cables. CAUTION: Failure to follow proper disconnect procedures could result in damage to the cable or your unit.
  • Page 6: Keyboard Hot Keys

    Enter Ctrl Ctrl Keyboard Programming The Compaq Rack Keyboard with Hot Keys and Trackball supports seven keystrokes for assigning up to nine devices to hot keys. Programming a hot key: Press the Programming Wizard Key. Press the Print Scrn key.