Related Manuals for adapt Pico Play ADPP-99
Summary of Contents for adapt Pico Play ADPP-99
- Page 1 Adapt Pico Play ADPP-99 User Manual Operating Instructions Notice: Please read the user manual carefully before using this product...
-
Page 2: Table Of Contents
Safety and Maintenance Instruction Table of Contents To Prolong the life of the mini projector all the following safety, operating instructions and maintenance should be read, adhered to and followed before the unit is operated. Safety and Maintenance Instruction ……………………………… For your Safety 1. -
Page 3: Functions Overview
Functions Overview ● Power supply: DC +5V/2.5A DC terminal:3.5*1.3*8MM ● Power consumption: 4.5W 1. Photo format: JPEG ● Built-in speaker: 3.7V/1500 mAH 2. Video format: AVI、RM/RMVB、3GP、MPG/MPEG 、MP4 ● Battery charging time: approximately 80 minutes 3. Music format: MP3、WMA 4. Basic setup function 5. -
Page 4: Basic Operation
Figure Ⅰ Projector Overview ● Use “LEFT” or “RIGHT” buttons to highlight corresponding storage device icon, and press “OK” to select and enter Media Menu. Note: Reset the unit if it freezes and/or is not working properly. Insert a thin, pointed object into Reset button(as shown in Figure Ⅰ... - Page 5 3、Music Mode ● Under video mode, using “UP” or “DOWN” button to fast forward or fast backward. ● Select “Music” icon on “Media Menu” and press “OK” to enter Music Mode. ● When the control bar is hidden under the bottom of the screen, using “LEFT” or “RIGHT” ●...
-
Page 6: System Setup
System SETUP １.Slide Show Settings Select the “SETUP” icon on the “Home Menu” and press “OK” to enter. Select “Slide Show” icon on “SETUP”,then press “OK” button to enter slide show settings. Operating method:using “LEFT” or “RIGHT” button to highlight a setting item,then using “UP”... -
Page 7: Battery Recharging
4. About: This displays the current software version authorized service center. Do not disassemble or repair it by yourself. If any questions you can also visit the support section of www.adapt-mobile.com. 5. Default: This will restore to the system default settings The following are some common problems and solutions for reference. -
Page 8: Accessories
2. USB cord 1 piece 5 No image when AV input ● CVBS cord is not connected or there is a connection error. Make sure the CVBS cord is properly connected. ● Poor contact or the CVBS cord is with quality problems. Make sure the connection with CVBS cord is perfect and the cord itself is of good quality.