1. Manuals
  2. Brands
  3. Gate Tel Manuals
  4. Gate Opener
  5. EZgate
  6. User manual

Gate Tel EZgate User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

EZgate
User manual
Rev. 3 – 20/07/10
1
GateOpen - User manual Rev. 3 – 20/07/10

Advertisement

Table of Contents
loading

Summary of Contents for Gate Tel EZgate

  • Page 1 EZgate User manual Rev. 3 – 20/07/10 GateOpen - User manual Rev. 3 – 20/07/10...
  • Page 2 1. Overview The GateOpen is a complete system solution for cellular gate\door access control. The unit stores white list of authorized users; when someone calls the unit, the unit hangs-up the call and check if the caller ID exists in the list, if it does, a pulse generated by internal relay, command the gate\door to open.

  • Page 3: General Product Description

    2. General Product Description 2.1 Dimensions 2.2 Weight 120 grams. 2.3 Input voltage 5V-30V DC 2.4 Casing material The case made from plastic PC IP54 Avoid exposing the unit to liquid or moisture GateOpen - User manual Rev. 3 – 20/07/10...

  • Page 4: Environmental Requirements

    2.5 Environmental requirements 2.5.1 Temperature range Ambient temperature Note in plastic enclosure The unit is fully functional in all the -20°C to +55°C temperature range, and it fully neets the ETSI specification Operating The module is fully functional in all the Temperature Range temperature range.

  • Page 5: Installation

    3. Installation 3.1 Electronic Gate\Door requirements The Electronic Gate\Door requires dry contact activation 3.2 SIM card insertion With a Philips screw driver open the SIM card drawer cover and insert the SIM card. Make sure the SIM card is capable to receive incoming SMS messages and to identify a caller ID.

  • Page 6: Programming The Unit

    4. Programming the unit The unit can be programmed in four ways 1. By a computer with the GTO using serial cable 2. By a computer with the GTO using data call (CSD connection) 3. By a computer with the GTO using GPRS connection (over the internet) 4.
  • Page 7 Open the GTO software and click the “communication selection” button Select “Modem connection” option, insert the unit password (default password is 1234), select the proper com port, insert the GateOpen phone number and press OK. Click the “connect” button to establish the connection to the unit; it can take up to one minute to establish the communication.

  • Page 8: Change The Software Language

    4.1.3 GPRS connection (over the internet) In order to use this option the GateOpen SIM must support GPRS connection and to have fix internet IP, contact the GSM carrier to enable these options. Before a GPRS connection can be establish with the unit, the GPRS parameters must be set to the unit using direct serial connection, refer to miscellanies screen for more information.

  • Page 9: Users Screen

    4.1.5 Users screen Manage the users’ whitelist. All the descriptions below are enabled only after connecting to the unit. Get the users list from the GateOpen unit: 1. Click the “Retrieve numbers” button 2. Verification screen will popup, Click “Yes” 3.
  • Page 10 6. Click the “Set” button, the selected field will fill with the wanted parameters and its icon will be changed to 7. The changes will not take place until writing them to the unit Delete user: 1. Click on a user record or enter its entry number in the “Entry No.” field 2.
  • Page 11 4.1.6 Restricted users screen Manage the restricted users’ whitelist. A restricted user is able to activate the outputs in three ways: 1. From time to time in specific week days, e.g. 10:30-15:00 on Sunday and Friday 2. From date to date, e.g. from 05/05/07 08:00 to 06/06/07 23:00 3.
  • Page 12 Add restricted user: 1. Click on an empty restricted user record or enter its entry number in the “Entry No.” field 2. Enter the phone number field 3. Enter the user name field 4. Select the user mode and enter the user mode parameters 5.
  • Page 13 4.1.7 Miscellanies screen Manage the unit parameters. Unit name: Retrieve or write the unit name Unit time: In order to write the current time to the unit, retrieve the PC time and then write it to the unit. The unit clock will be lost when the power turned off. Unit password: Define new password for the unit.
  • Page 14 Personnel numbers: The personnel numbers define the phone numbers that will notify by SMS when the unit reject\allow an incoming call. The unit can hold up to 3 personnel numbers. Approved user SMS syntax: Phone number: <Caller ID> <Gate Open SMS> <Gate Open SMS>...
  • Page 15 GPRS Retrieve\write the GPRS parameters: • Enable\disable GPRS • Firewall IP – the only IP which the unit will get incoming connection from. Use 0.0.0.0 to allow all IPs • APN – the cellular network access point • User name – the cellular GPRS user name •...

Table of Contents