Videotel VP70 Owners Manual And Specifications

d
Packing list
With your order you should receive...
1 - External Power Supply (1)
1 - Remote Control (2)
1 - 8 Gig SD Card (3)
(4)
1 - 8 Gig USB Drive
1 - VP70 HD Video Player (5)
1 - 6' HDMI Cable (6)
1 - 6' RCA Video/Audio Cable
Basic operation of the VP70
The VP70 is an auto on and auto looping HD video player (picture and audio files do not
auto start on power up). Once you connect the player to a TV or monitor, simply load
your video files on the enclosed SD card or USB drive and insert it into the player. The
order in which the files are sorted on the card is the order in which they play . Once you
load the card or drive, simply remove the power cord for a few seconds then reconnect
the power. Your player will start play and continue to do so until power is turned off or
the remote is used to stop or pause the video.
Note - The VP70 only outputs 1 video source at a time and the default is HDMI out. If
you are using VGA (40) or Composite video out (38), you can switch the video output
by pressing the VGA (10) or CVBS (composite)
Remote control
(8) Power - turns VP70 on and off
(9) CVBS - switches video output to
composite video (yellow RCA)
(10)
VGA - switches video output to
VGA (15 pin for computer monitor)
(11)
Scale - This button switches between
4:3, full screen and default
(12)
Sub -N/A
(13) OSD - rotates through repeat options
Repeat all / Repeat current / Repeat off
(14) Rotate - N/A
(15) Menu - activates the main menu
for the player (41)
(16) Goto - N/A
(17) Return - returns you to the previous
menu selection
(18)
Stop - stops the current audio, video or
picture file that is playing
(19)
Rewind - rewinds the current audio or
video that is playing in steps of 1.5x, 2x,
4x, 8x, 16x, 32x
(20) Previous - jumps backwards to the
previous audio, video or picture file
(21) Music - N/A
(22) Photo - N/A
i g i t a l
(7)
(9) on the remote.
(15)
(15)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(2)
(1) (3) (4)
Owners manual and specifications
(5) (6)
(23) Mute - mutes current audio output
(24) HDMI - switches video and audio output
to HDMI Jack
(25)
Audio - switches between audio formats
(26) Zoom - N/A
(23)
(27)
Setup - Enter the set up menu
(24) the player. Access selections like video
resolution output, language, etc..
(25)
(28) Play and pause - press once to pause &
again to resume play of current file
(26)
(29) Fast forward - fast forwards the current
(27)
audio or video that is playing in steps of
1.5x, 2x, 4x, 8x, 16x, 32x
(28)
(30) Arrow buttons for navigating the menu
or file selection section
(31) Next - jumps forwards to the
(29)
next audio, video or picture file
(32) Movie - N/A
(30)
(33)
View - displays details about the current
video, audio or picture file
(31)
(34)
Volume - adjust the output volume up
and down
(32)
(33)
(34)
VP
70
(7)
(15)
(54)
for