Hitachi CP-EX250 User Manual page 13

Connecting with your devices (continued)
NOTE • The HDMI port of this model is compatible with HDCP (High-band-
width Digital Content Protection) and therefore capable of displaying a video
signal from HDCP compatible DVD players or the like.
- The HDMI supports the following signals.
Video signal : 480i@60, 480p@60, 576i@50, 576p@50, 720p@50/60,
Audio signal : Format Linear PCM
- This projector can be connected with another equipment that has HDMI
connector, but with some equipment the projector may not work properly,
something like no video.
- Be sure to use an HDMI
- Use a Category 2-certifi ed HDMI
projector.
- When the projector is connected with a device having DVI connector, use a
DVI to HDMI
TM
(continued on next page)
VCR/DVD/Blu-ray Disc
1080i@50/60, 1080p@50/60
Sampling frequency 48kHz / 44.1kHz / 32kHz
cable that has the HDMI
TM
cable to connect with the HDMI input.
player
TM
cable to input 1080p@50/60 signal to the
TM
Monitor
RGB IN
Speakers
(with an amplifi er)
logo.
TM
Setting up
TM
13