1. Manuals
  2. Brands
  3. VNS CCTV Manuals
  4. Security Camera
  5. High Speed Dome Camera
  6. User manual

VNS CCTV High Speed Dome Camera User Manual

High speed dome camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
High Speed Dome Camera
User's Manual
●
Please read the manual carefully before installing and using the unit.
●

Advertisement

Table of Contents
loading

Related Manuals for VNS CCTV High Speed Dome Camera

Summary of Contents for VNS CCTV High Speed Dome Camera

  • Page 1 High Speed Dome Camera User’s Manual ● Please read the manual carefully before installing and using the unit. ●...

  • Page 2: Table Of Contents

    5.3 Outer-shape and Dimension of In-ceiling-mount High-speed Dome Camera ------------------------------------------------------------------------------------------------------------14 5.4 Preparation for the installation---------------------------------------------------------------15 5.5 Installation of Wall-mount High Speed Dome Camera--------------------------------17 5.6 Installation of Pendant-mount High Speed Dome Camera---------------------------22 5.7 Installation of Ceiling-mount High Speed Dome Camera-----------------------------25 5.8 Installation of In-ceiling-mount High Speed Dome Camera--------------------------28 5.9 Connection and Installation of Alarm-------------------------------------------------------31...
  • Page 3 VI. Configure the system of the High Speed Dome Camera -----------33 6.1 Configure Communication Protocol, Address and Baudrate of High Speed Dome Camera -------------------------------------------------------------------------------------33 6.2 Table for the functions that can be configured or operated directly through the keyboard ---------------------------------------------------------------------------------------------35 VII.

  • Page 4: Important Safeguards

    Important Safeguards 1. During the course of transportation and storage, the product should be avoided from incorrect operations such as heavy pressing, strong vibration, soaking etc, which may cause damage to the unit. 2. The product is designed for Pendant or Wall Mount installation, so it can not be installed upside-down.

  • Page 5: Introduction

    Based on the above characters of common High Speed Dome Camera, this type of High Speed Dome Camera is further equiped with OSD menu operation interface with multi Input Modes, which further facilitates all kinds of operations.

  • Page 6: Technical Data

    II. Technical Data Power supply DC15V(1.5A) outdoor:(-25 ～+65 ) Working temperature Relative humidity ≤95% Power consumption Communication system RS485 bus Baud rate of communication 1200 / 2400 / 4800 / 9600bps Address Range 1~255 Manual Pan Speed 0.5º-200º/s(64 ranges) Highest Cruising Speed 350º/s Pan movement 360º...

  • Page 7: Characteristics

    III. Characteristics The unit is equipped with a camera programme which can automatically identify 8 brands of camera modules: HITACHI, SONY, LG, CANON, SAMSUNG, KT&C, CNB and JCO. Adopting multi-functional high-performance DSP design with stable performance Integrated design with compact structure and high reliability Precise electric motor drive ensuring smooth running and agile reaction Internally-saved data will not lose within one year after power off.

  • Page 8: Description Of Functions

    IV. Description of Functions 1. OSD Menu Operation The functions of the pan/tilt and the built-in camera module can be conveniently configured and carried out through the OSD menu. These functions include: Preset Positions, Tours, Pattern Scan, Left & Right Scan, Alarm, Language Choosing, and the configuration of the parameters of the Camera Module etc.
  • Page 9 the lens will automatically flip 180º horizontally, then the user can still control it to move upwards till 90° , which enables the user to directly observe the situation on the back side, thus tilt 180° consecutive monitoring can be realized. 5.
  • Page 10 menu. After configuring well, the user can run the left/right scan directly through the OSD menu, then the speed dome will automatically run horizontally between the left limiting position and the right limiting position, at the preset speed. 8. Pattern Scan The unit can store the user’s operating track and invoke it when necessary.
  • Page 11 be carried out can be configured, the range is 1~240minutes. 11. Camera module Lens Control Users can adjust the Focal-length through controlling the keyboard to get panoramic view or close view that they desire. Focal Length Control Users can adjust the Focal-length through controlling the keyboard to get panoramic view or close view that they desire.
  • Page 12 spotlight, etc ● When the object is behind the glass with water drops or dust ● When the object moves very fast ● When the object is large-sized and drab, such as wall ● When the object is too dark or fuzzy Iris Control ●...

  • Page 13: Installation And Connection Of The System

    V. Installation and Connection of the System There are three types of installation for high speed dome cameras, the dimensions are shown below: 5.1 The outer-shape and dimension of Wall-mount, Pendant-mount High-speed Dome Camera 5.2 The outer-shape and dimension of Ceiling-mount High-speed Dome Camera - 13 -...

  • Page 14: Outer-Shape And Dimension Of In-Ceiling-Mount High-Speed Dome Camera

    5.3 The outer-shape and dimension of In-ceiling-mount High-speed Dome Camera - 14 -...

  • Page 15: Preparation For The Installation

    ·Installation Style and Ancillary Components Products Bracket Cable (with connector) Installation Style Power Cable 1pc Wall-mount Wall bracket High Video cable 1pc Bracket with the length Pendant-mount Speed 485 cable 1pc of 20cm or 40cm Dome Lightening-proof cable 1pc Ceiling-mount No bracket Camera 5-strands cable 1pc (Alarm input)
  • Page 16 · Please check whether the attachments are all ready, and whether the installing location and style of installation are compatible. · The wall-mount and the pendant-mount high speed dome camera is composed of bracket, housings, power supply, decoding board, pan/tilt, temperature controlling devices, etc.

  • Page 17: Installation Of Wall-Mount High Speed Dome Camera

    the module with the housing with M3 screw and make sure it is tight. Attention: The adaptor equiped can only be placed indoor or in water-proof box or other water-proof spaces, it can not be placed directly outdoor, otherwise water may seep in and damage the adaptor. 5.5 Installation of Wall-mount High-speed Dome Camera 5.5.1 Installation of Wall-mount Bracket Attention:...
  • Page 18 B. Use an electrical drill to make four holes for M6 screws on the above-drawn positions, and drive in the expansion M6 screws; Push the power cable, communication cable and video cable through the bracket tube, leaving long enough cables for connection; D.
  • Page 19 5.5.2 Installation of High Speed Dome Camera a. Unpack the carton and carefully take out the speed dome camera and its attachments, open the vitreous cover and take out the fillings. b. Check cable connectors and see if any of them loose and configure the coding switch.
  • Page 20 Connect BNC video outlet of the unit with the already disposed video cable, the power cable with the already disposed power cable and RS485 controlling cable with already disposed RS485 controlling cable. The cables of high speed dome camera is shown below: Cable Application...
  • Page 21 5-strand Alarm input Detector ---- Black (Alarm input public terminal) cable high speed dome Yellow (the 1st channel alarm input) Green (the 2 channel alarm input) Blue (the 3 channel alarm input) White (the 4th channel alarm input) 2-strand Alarm output High speed dome--- Brown (alarm output public terminal) cable...

  • Page 22: Installation Of Pendant-Mount High Speed Dome Camera

    self-check and is ready to receive controlling instructions c. Use controlling device to control the unit, checking whether it can perform the functions of the pan/tilt and camera lens. If not, please check the configuration of communication protocol, Baud rate and address, and the connection of 485 controlling cable.
  • Page 23 Connect BNC video outlet of the unit with the already disposed video cable, the power cable with the already disposed power cable and RS485 controlling cable with already disposed RS485 controlling cable. The cables of high speed dome camera is shown below: Cable Application...
  • Page 24 Video cable Camera module--- BNC connector monitoring device Lightening High speed dome --- Grey proof the earth 5-strand Alarm input Detector ---- Black (Alarm input public terminal) cable high speed dome Yellow (the 1st channel alarm input) Green (the 2 channel alarm input) Blue (the 3 channel alarm input)

  • Page 25: Installation Of Ceiling-Mount High Speed Dome Camera

    5.7 Installation of ceiling-mount high speed dome camera 5.7.1 Installation of ceiling-mount installation board Attention:The ceiling for the selected installation location must be firm without peeling.
  • Page 26 5.7.2 Installation of High Speed Dome Camera a. Unpack the carton and carefully take out the speed dome camera and its attachments, open the vitreous cover and take out the fillings. b. Check cable connectors and see if any of them loose and configure the coding switch.
  • Page 27 RS485 controlling cable with already disposed RS485 controlling cable. The cables of high speed dome camera is shown below: Cable Application Connecting Objects Remarks power supply high speed dome--- Power supply connecting outlet power supply adaptor RS485 cable high speed dome---...

  • Page 28: Installation Of In-Ceiling-Mount High Speed Dome Camera

    self-check and is ready to receive controlling instructions c. Use controlling device to control the speed dome camera, checking whether it can perform the functions of the pan/tilt and camera lens. If not, please check the configuration of communication protocol, Baud rate and address, and the connection of 485 controlling cable.
  • Page 29 Connect BNC video outlet of the unit with the already disposed video cable, the power cable with the already disposed power cable and RS485 controlling cable with already disposed RS485 controlling cable. The cables of high speed dome camera is shown below: - 29 -...
  • Page 30 Cable Application Connecting Objects Remarks power supply high speed dome--- Power supply connecting outlet power supply adaptor RS485 cable high speed dome--- Green (A), white(B) 7-strand controlling device cable Video cable Camera module--- BNC connector monitoring device Lightening proof High speed dome --- Grey the earth 5-strand...

  • Page 31: Connection And Installation Of Alarm

    please check the configuration of communication protocol, Baud rate and address, and the connection of 485 controlling cable. 5.9 Connection and installation of alarm Connect the alarm cables according to the sketch below. Once distinguishing the alarm signal, the speed dome will immediately act as per the process configured before, it will start the camera, display the image of the alarm zone on the monitor, adjust the speed dome at the alarm point, and monitor the preset position, record what happens at the...
  • Page 32 that there is alarm signal coming in, thus the alarm output is always on. Alarm output connection sketch Connection sketch for Alarm input with Normally-Closed (NC) detector Connection sketch for Alarm input with Normally-Open (NO) detector - 32 -...

  • Page 33: Configure The System Of The High Speed Dome Camera

    Before the installation of the speed dome camera, you must confirm the protocol and Baud rate of the controlling system as well as the address code of the high speed dome camera, then, configure the switches in the speed dome so that they are identical with that of the controlling system.
  • Page 34 6.1.1 Configure Communication Protocol of the High Speed Dome Camera The DIP-1 and DIP-2 of SW2 on the PCB board are for communication protocol configuration. Please refer to the following table: PROTOCOL PELCO_D PELCO_P PELCO_D1 If the controlling device could only support the preset position numbers below 128, please use PELCO_D1 controlling protocol.

  • Page 35: Keyboard

    6.1.3 Configure Baud Rate of Communication DIP-3 and DIP-4 of SW2 on the PCB board are used to configure Baudrate of communication, the default configuration is 4800BPS. Following table shows states of coding switches and corresponding Baudrate. Baudrate 1200 BPS 2400 BPS 4800 BPS 9600 BPS...
  • Page 36 (low speed) Start Pan/tilt 360º scanning Activate default position function (medium speed) Start Pan/tilt 360º scanning Close default position function (high speed) High speed dome camera Configure default position position restoration function Enter menu of the camera Open the fog dispersing function...

  • Page 37: Configuration And Operation Through The Osd Menu

    controlling system interfaces may differ in operation, operation details are subject to the related manufacturer’s manuals. Under certain circumstances of special requirements and operations, please refer to dealers for necessary information. VII. Configuration and Operation through the OSD MENU 7.1 Basic Operation: 7.1.1 Power on and self-checking of the Speed Dome: Once power on, the unit enters self-checking procedure.

  • Page 38: Table For All Configuration And Operations Through Osd Menu

    7.1.2 Enter and exit the Main Menu 1) The Main Menu will be displayed when press “95 PREVIEW” (invoke Preset Position 95) or invoke Preset Position No. 1 for twice within 5 seconds. All the configuration with the menu has to be through Main Menu.
  • Page 39 1. EDIT The titles can be editted SPEEDDOME with 4 input modes TITLE 1. SPEEDDOME TITLE 2. TITLE To choose which items of DISPLAY 2. PRESET TITLE informations are to be SETUP shown on the screen 3. DIRECTION TITLE 1. AUTOFLIP on/off 2.
  • Page 40 3. EXPCOMP 4. SLOW SHUTTER 5. WB MODE 6. R GAIN 7. B GAIN 8. CAMERA RESET Maximum 128 Preset 1. SERIAL NO. Positions 2. SETUP 1. PRESET POSITION 3. PREVIEW 4. DELETE 5. EDIT TITLE High, medium, low 3 1.

  • Page 41: Configure The Information Of The System

    7.3 Configure the Information of the System 7.3.1 Compile the title of the Speed Dome When multi Speed Domes are used in the system, in order to more easily identify the Speed Domes, Speed dome title configuration function can be used. The configuring method as below: 1.
  • Page 42 now the cursor is at [TITLE: ] position. EDIT SPEEDDOME TITLE →TITLE: IRIS+: SAVE IRIS-: EXIT 4. Press [FOCUS+] key to enter Input Modes optional state, move the joystick to “ABC”, then press [FOCUS+] key repeatedly to choose required Input Mode. 5.
  • Page 43 cursor is moved to “ABC input”, press [FOCUS+] to confirm the Input Mode, then corresponding character is shown. Move the joystick downwards to the characters, move the joystick to left or right to the required character, then press [FOCUS+] to confirm the required character.
  • Page 44 2. Choose DIGIT input mode: A: Move the joystick downwards and move the cursor to “DIGIT”, press [FOCUS+] to choose Input Mode; B: After choosing “DIGIT”, use the joystick to move the cursor downwards to Digit Optional Zone, then move the cursor to “1” and press [FOCUS+] to confirm.
  • Page 45 as Digit input.) Add “Aa!” to Title Compiling Area, now “1Aa!” is shown in the Title Compiling Area, which means the title is compiled successfully. B: Press [IRIS+] key to save and return to the upper grade menu. Attention: So long as the “SPEED DOME TITLE” function in the “TITLE DISPLAY SETUP”...
  • Page 46 SYSTEM INFO 1 EDIT SPEEDDOME TITLE →2 TITLE DISPLAY SETUP 3 PAN/TILT SETUP 4 CLEAR THE SETUP IRIS+: RETURN IRIS-: EXIT 3. Operate the joystick upwards or downwards to move the cursor to [TITLE DISPLAY SETUP], press [FOCUS+] to enter TITLE DISPLAY SETUP state, now the cursor is at “SPEEDDOME TITLE ON”.
  • Page 47 7. Press [IRIS-] to exit the menu without saving. Following the moving of the Speed Dome, the information on the screen changes accordingly. From the screen, users can see some current information of the Speed Dome including: Horizontal and Vertical Angle, the Speed Dome’s Title, the Preset Position’s Title.
  • Page 48 3．Operate the joystick upwards or downwards to move the cursor to [PAN/TILT SETUP], press [FOCUS+]to enter PAN/TILT SETUP interface, now the cursor is at “AUTO FLIP ON”. PAN/TILT SETUP →1 AUTO FLIP 2 PROPORTION P/T 3 IDLE TIME 4 IDLEACTIVATE IRIS+: RETURN IRIS-: EXIT 4.
  • Page 49 closed. Press [IRIS+] to save and return to the upper grade menu. Small tip When manually adjusting, if the focus length is far, due to the high sensitivity of the speed dome, the image will move very quickly even if the joystick is slightly touched, which may cause the lost of image;...
  • Page 50 MAIN MENU →1 SYSTEM INFO 2 CAMERA SETUP 3 AUTO-RUN 4 ALARM SETUP IRIS-: EXIT 2. Operate the joystick upwards or downwards to move the cursor to [SYSTEM INFO], press [FOCUS+] key to enter the lower grade menu. SYSTEM INFO 1 EDIT SPEEDDOME TITLE 2 TITLE DISPLAY SETUP 3 PAN/TILT SETUP...
  • Page 51 4. Operate the joystick upwards or downwards to move the cursor to [CLR ALL PRE-POSITION], press [FOCUS+] key, now the sign “ ” appears at the cursor position, which means all the preset positions are cleared. 5. Operate the joystick upwards or downwards to move the cursor to [CLR ALL TOUR], press [FOCUS+] key, now the sign “...

  • Page 52: Configure The Parameter Of The Camera Module

    SYSTEM INFO →1 EDIT SPEEDDOME TITLE 2 TITLE DISPLAY SETUP 3 PAN/TILT SETUP 4 CLEAR THE SETUP IRIS+: RETURN IRIS-: EXIT Operate the joystick upwards or downwards to show the second page which shows as: SYSTEM INFO 5 LANGUAGE ENGLISH IRIS+: RETURN IRIS-: EXIT 3.
  • Page 53 MAIN MENU 1 SYSTEM INFO →2 CAMERA SETUP 3 AUTO-RUN 4 ALARM SETUP IRIS-: EXIT 2. Operate the joystick upwards or downwards to move the cursor to [CAMERA SETUP], press [FOCUS+] to enter the lower grade menu: CAMERA SETUP →1 DIGITAL ZOOM ON 2 BLC MODE ON 3 B&W/COLOR MODE 4 ADVANCED FUNC SETUP...
  • Page 54 times of the camera lens is the optical zooming times multiplying the digital zooming times. If the Digital Zooming Configuration is closed, the maximum zooming times of the camera lens is just the optical zooming times. 7.4.2 Back Light Compensation Mode 1.
  • Page 55 4. Press [IRIS+] to save and return Small Tip Strong backlight makes the back-lighted object have shadow, the Backlight Compensation Function enables the camera to automatically adjust the Iris to match the changing of the light, automatically adjust the brightness of the Main Object to make the image clearly displayed. Attention: This function is related to the type and parameter of the inside camera module.
  • Page 56 CAMERA SETUP 1 DIGITAL ZOOM ON 2 BLC MODE ON →3 B&W/COLOR MODE 4 ADVANCED FUNC SETUP IRIS+: RETURN IRIS-: EXIT 3. Operate the joystick to move the cursor to [B&W/COLOR MODE] option, press [FOCUS+] to enter. There are 3 options: [Auto] Auto Color/B&W converting mode, the camera will automatically convert according to the illumination;...
  • Page 57 camera, if there is no such function with the camera, this function in the menu is invalid. 7.4.4 CONFIGURING OF ADVANCED FUNCTIONS For HITACHI camera, the configuring of ADVANCED FUNCTIONS is as below: 1. Press 95+PREVIEW to enter the Main Menu. MAIN MENU 1 SYSTEM INFO →2 CAMERA SETUP...
  • Page 58 ADVANCED FUNC SETUP ADVANCED FUNC SETUP 1 EXP MODE AUTO 5 WB MODE AUTO 2 EXP LEVEL 6 R GAIN 3 EXPCOMP 7 B GAIN →4 SLOW SHUTTER MANU →8 CAMERA RESET IRIS+: SAVE IRIS-: EXIT IRIS+: RETURN IRIS-: EXIT 4.
  • Page 59 Configuring parameter matching table: Exposure Mode Auto Shutter Brightness Gain 1/50 F1.6 1/100 F2.2 1/150 F3.2 12dB 1/250 F4.4 18dB 1/500 F6.4 24dB Exposure parameter 1/1000 F8.8 30dB 1/2000 1/4000 1/10000 1/30000 1/1.5 SLOW SHUTTER 1/12 1/25 5. Operate the joystick to move the cursor to [SLOW SHUTTER], press [FOCUS+] to configure, the configuring parameter is as the SLOW SHUTTER option in the above table.
  • Page 60 7.4.5 CONFIGURATION OF ADVANCED FUNCTIONS For HITACHI camera, the configuration of ADVANCED FUNCTIONS is as below: 1. Press 95+PREVIEW to enter the Main Menu. MAIN MENU 1 SYSTEM INFO →2 CAMERA SETUP 3 AUTO-RUN 4 ALARM CONFIGUREUP IRIS-EXIT 2. Operate the joystick upwards or downwards to move the cursor to [CAMERA SETUP], press [FOCUS+] to enter the lower grade menu: CAMERA SETUP 1 DIGITAL ZOOM ON...
  • Page 61 ADVANCED FUNC SETUP ADVANCED FUNC SETUP 1 EXP MODE AUTO 5 WB MODE AUTO 2 EXP LEVEL 6 R GAIN 3 EXPCOMP 7 B GAIN →4 SLOW SHUTTER MANU →8 CAMERA RESET OFF IRIS+: SAVE IRIS-: EXIT IRIS+: RETURN IRIS-: EXIT 4.
  • Page 62 [OFF] state. 6. Press [IRIS+] to save 7. Press [IRIS-] to exit the menu without saving 7.4. 6 CONFIGURATION OF ADVANCED FUNCTIONS For Sony camera, the configuration of ADVANCED FUNCTIONS is as below: 1. Press 95+PREVIEW to enter the Main Menu. MAIN MENU 1 SYSTEM INFO →2 CAMERA SETUP...
  • Page 63 mode respectively in 2 interfaces: The first group interface as below: ADVANCED FUNC SETUP ADVANCED FUNC SETUP 1 EXP MODE Auto 5 WB MODE AUTO 2 EXP LEVEL 6 R GAIN 3 EXPCOMP 7 B GAIN →4 SLOW SHUTTER MANU →8 CAMERA RESET OFF IRIS+: SAVE IRIS-: EXIT...
  • Page 64 Parameter Configuration matching table: Exposure Auto Shutter Brightness Iris Mode F2.0/0 F1.4 F1.6/0 F1.6 F1.4/0 F2.0 1/12 F2.4 1/25 The “0” in F1.4/0 can be F2.8 Exposure changed in the range as: Paramete 1/50 F1.4/0 F3.4 1/75 F4.0 1/100 F4.8 1/120 F5.6 1/150...
  • Page 65 on the screen is also very dark, configure slow shutter to prolong the light-accepting time, so that the image shot in dark could also be clear. 6. Press [IRIS+] to save. 7. Press [IRIS-] to exit the menu without saving. 7.4.7 CONFIGURATION OF ADVANCED FUNCTIONS For Sony camera, the ADVANCED FUNCTIONS SETUP as below: 1.
  • Page 66 mode respectively in 2 interfaces: ADVANCED FUNC SETUP ADVANCED FUNC SETUP 1 EXP MODE Auto 5 WB MODE AUTO 2 EXP LEVEL 6 R GAIN 3 EXPCOMP 7 B GAIN →4 SLOW SHUTTER MANU →8 CAMERA RESET IRIS+: SAVE IRIS-: EXIT IRIS+: SAVE IRIS-: EXIT 4.

  • Page 67: Configuration Of Auto Running

    5. Move the cursor to the CAMERA RESET configuration option, press [FOCUS+] to begin to configure, when [ON] is chosen, the camera is initialized, press [IRIS+] to save and return, then it automatically return to [OFF] state. 6. Press [IRIS+] to save 7.
  • Page 68 3. Move the cursor to the [PRESET POSITION] option, press [FOCUS+] to enter the lower grade menu. PRESET POSITION →1 SERIAL NO. 2 SETUP 3 PREVIEW 4 DELETE IRIS+: SAVE IRIS-: EXIT 4. Configure Preset Position Number: Operate the joystick to move the cursor to [SERIAL NO.], press [FOCUS+] to enter Serial Number configuration Press [FOCUS+] to increase the number, press [FOCUS-]...
  • Page 69 object image, press [FOCUS+] to save the configuration. Small tips Preset position function is to save the Horizontal angle, the tilt angle as well as the Focus Length etc parameter in the Speed Dome, when necessary, promptly invoke these parameters, the Pan/Tilt and the Lens can automatically adjust to this position.
  • Page 70 7.5.2 Left/right scan 1. Press 95+PREVIEW button to enter the Main Menu MAIN MENU 1 SYSTEM INFO →2 CAMERA SETUP 3 AUTO-RUN 4 ALARM SETUP IRIS-: EXIT 2. Move the cursor to [AUTO-RUN] by operate the joystick upwards and downwards, press [FOCUS+] button to enter the lower menu of [AUTO-RUN].
  • Page 71 out. Operate the joystick to choose the object image, press [FOCUS+] button to save. 5. Configuring of right limiting position: move the cursor to [RIGHT LIMIT] by operating the joystick, press [FOCUS+] button, when a “ ”sign appears in front of [RIGHT LIMIT], it means the configuring can be carried out.
  • Page 72 2. Move the cursor to [AUTO-RUN] by operating the joystick upwards and downwards, press [FOCUS+] button to enter the lower menu of [AUTO-RUN]. Move the cursor to [TOUR], press [FOCUS+] button and show the menu as: AUTO-RUN 1 PRESET POSITION 2 AUTO SCAN →3 TOUR IRIS+: SAVE IRIS-: EXIT...
  • Page 73 TOUR NO. PRESET TIME PRESET TIME 01.→000 000; 02 . 000 000 03. 000 000; 04 . 000 000 05. 000 000; 06 . 000 000 IRIS+: SAVE IRIS-: EXIT 4. Configuring the staying time at Preset Position: move the cursor to [SETUP], press [FOCUS+] button to enter the tour preset position and staying time configuring.
  • Page 74 and move the cursor to the next configuration point for configuring, use the same method to add all the preset positions of the tour as well as the corresponding dwelling time. After configuring, press [IRIS+] button to save and return. Now, the first tour route has been configured successfully, using the same method, you can configure the other tour routes.
  • Page 75 2. Move the cursor to [AUTO-RUN] by operate the joystick upwards and downwards, press [FOCUS+] button to enter the lower menu of [AUTO-RUN]. Move the cursor to [PATTERN SCAN], press [FOCUS+] button and show the menu as: AUTO-RUN 1 PRESET POSITION 2 AUTO SCAN 3 TOUR →4 PATTERN SCAN...

  • Page 76: Configuration Of Alarm Function

    6. Run the Pattern Scan: move the cursor down to [PREVIEW], press [FOCUS+] button to run the Pattern scan. 7. Delete the configuration: enter the pattern scan configuration menu, move the cursor down to [DELETE], press [FOCUS+] button and a “...
  • Page 77 MAIN MENU →1 SYSTEM INFO 2 CAMERA SETUP 3 AUTO-RUN 4 ALARM SETUP IRIS-: EXIT 2. Operate the joystick to move the cursor to [→4 ALARM SETUP] option, press [FOCUS+] to enter the lower grade menu. ALARM SETUP →ALARM1 CALL PRESET:N/A ALARM2 CALL PRESET:N/A ALARM3 CALL PRESET:N/A ALARM4 CALL PRESET: N/A...
  • Page 78 ALARM SETUP →ALARM1 CALL PRESET:001 ALARM2 CALL PRESET:N/A ALARM3 CALL PRESET:N/A ALARM4 CALL PRESET: N/A IRIS+: RETURN IRIS-: EXIT B. If there is a need to configure any preset position among 001-064, just press [FOCUS+] to increase or [FOCUS-] to decrease. C.

  • Page 79: Simple Trouble Shooting Table

    the unit distinguishes alarm signal, the unit will not be adjusted to corresponding preset position, but the alarm output still responds. VII. Simple Trouble Shooting Table Problems Possible causes remedies Wrong connection of power cables Correct action, picture, no indicator Power supply adaptor damaged Replace on when power is...

  • Page 80: Viv. Correspondence Of Address And Coding Switches

    distance far, Thicken the controlling cable attenuation of 485 signal is too much The driving power of the 485 Replace with converter with converter is not enough separate power supply VIII. Correspondence of Address and Coding Switches (SW1: DIP1-DIP8) 87654321 87654321 87654321 00000001...
  • Page 81 87654321 87654321 87654321 00011011 00111010 01011001 00011100 00111011 01011010 00011101 00111100 01011011 00011110 00111101 01011100 00011111 00111110 01011101 87654321 87654321 87654321 01011110 01111101 10011100 01011111 01111110 10011101 01100000 01111111 10011110 01100001 10000000 10011111 01100010 10000001 10100000 01100011 10000010 10100001 01100100 10000011 10100010 01100101...
  • Page 82 87654321 87654321 87654321 01111001 10011000 10110111 01111010 10011001 10111000 01111011 10011010 10111001 01111100 10011011 10111010 87654321 87654321 87654321 10111011 11010010 11101001 10111100 11010011 11101010 10111101 11010100 11101011 10111110 11010101 11101100 10111111 11010110 11101101 11000000 11010111 11101110 11000001 11011000 11101111 11000010 11011001 11110000 11000011...

Table of Contents