PTG electric radiant heater Instruction Manual

electric radiant heater
Instruction Manual
introduction
The Electric Radiant heater produces heat like the sun, warming people and objects and not the air in
between, providing the only form of heat that will not blow away. The Algarve is primarily designed for outdoor
use and it is therefore weatherproof. (IP54 rated & UL Listed)
Please read the following instructions carefully before use. The safety of this heater is guaranteed only by its
correct usage in accordance with these instructions, therefore it is recommended that they are retained for
future reference.

before using this appliance

Check that the voltage indicated on the type plate corresponds to the main supply voltage.
•
Ensure that the heater has been securely fastened to the mounting.
•
Disconnect main power during installation, cleaning and/or emitter replacement and ensure
•
that the emitter is cool.
Do not handle the halogen emitter with bare hands. If it is advertently touched, remove
•
finger marks with a soft cloth and methylated spirit or alcohol, otherwise the marks will burn
into the quartz, causing premature heater failure.
Touch the front glass as little as possible in order to avoid unsightly grease residue.
•
Do not use an extension cable with this product
•
Keep the main cable away from the body of the heater which will get hot during use
•
Do not cover or obstruct the heater when in use.
•
Ensure that children do not tamper with the heater.
•
Do not use if glass is broken
•