EarthQuake 14267 Operator's Manual page 11

FIGURE 8 - Discharge Bag (North American Models)
Install Discharge Bag
This product comes with a discharge bag for collection
of debris as it exits the discharge chute. Install the bag as
shown in FIGURE 8 or 9.
Add Engine Oil
Refer to "Engine Oil Type and Capacity" in the Regular
Maintenance section for oil type and fill procedures.
Add Fuel
Refer to "Adding Fuel" in the Operation section for fuel
specifications and filling procedures.
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5
Slide bag over dis-
Lift discharge
charge chute.
chute and slide
Make sure bag
bag over chute.
noose fits over top
Make sure bag
of discharge chute
noose fits over
and notch in chute
top of discharge
chute and notch bottom.
in chute bottom.
Pull drawstring tight.
Pull drawstring tight.
FIGURE 9 - Discharge Bag (CE Models)
Operator's Manual
Chipper/Shredders
Slide bag over dis-
charge chute.
Make sure bag
noose fits over top
of discharge chute
and notch in chute
bottom.
11