How To Setup Your Card Reader; Driver Installations; Windows Windows ® ® 98 & Windows Me & Windows - Visioneer USB2.0 Multi Card Reader User Manual

How to Setup Your Card Reader

1. Install driver first time if your system is Windows
section of driver installation)
2. Connect USB cable to your PC's USB port that usually labeled as
3. Connect mini USB end to card reader mini USB connector.

Driver installations

The card reader need to setup relative driver for Windows 98SE and Windows 2000, you can find
the setup disc that came with the package, and follow below steps to complete the driver installation.
The reader is driver-free for Windows
driver, just connect reader to PC's USB port directly. Windows will detect and install all the associated
files automatically. A "Removable Device" icon will appear on the task bar and recognized with four
"Removable Disk" icons in "My Computer" window.
Note1:
If you need to display memory card icon on each removable disk in Windows
®
Windows XP systems, we recommend you install driver. (Please refer to following
®
Windows ME & Windows
Note2:
All the driver installation steps may be a little different from this guide when you using a new
upgrade version O.S., in this situation please follow the Windows prompt steps to complete
the installation procedure.
®
98/SE or Windows
® ®
ME、Windows
®
XP driver installations)
®
2000, (Refer to the next
or
XP systems, you don't have to install any
symbols.
®
ME or