Video Setup Page - Amphion MediaWorks M510 Operating Instructions Manual

Changing setup values (continued)
Equalizer
3D Processing

Video Setup Page

Select this function to enter the following menu:
Video Setup
Equalizer
EQ Type:
There are 7 types of EQ setting.You may select the
favorite sound effect depending on the playing disc.
Bass Boost:
Enable the "Bass Boost" function.
Super Bass:
Enable the "Super Bass" function.
This function only works when "Bass Boost" is on.
Treble Boost :
Enable the "Treble Boost" function.
3D Processing
Reverb Mode:
3D PROCESSING MODE selection. There are 7 options
including "Concert, Living Room, Hall, Bathroom, Cave,
Arena, Church".
Component
The primitive Component setup is Vga output. If the value of
Component is set to Off, there is no picture on the player.
If you want to see the picture on the player again,
just turn off the power and reset.
TV CVBS
Set this function "on" to output the video signal on the
player to TV. During the period of TV CVBS output, the
screen of the player is blue. If you want to see the vi-
deo signal on the player again, just set this function"off".
Or, turn off the power and reset.
S VIDEO:
Set this function "on" to output the video signal on the
player to TV. During the period of S VIDEO output, the
screen of the player is blue.If you want to see the video
signal on the player again, just set this function"off".Or,
turn off the power and reset.
QUALITY:
There are seven selective items in this function. They are Sh-
arpness, brightness, contrast, Gamma, Hue, Saturation and
Luma Delay. Press PLAY
items and press or
And then press or
or "ENTER" to enter the selective
to select which item you want to set.
to set the value of the selected item.
26