Tivax SS 602 Instruction Manual

Electronic sewing machine

Advertisement

Michley/Tivax Limited Warranty To Original Purchaser
Michley/Tivax warrants this product purchased in the USA against defects in material
and workmanship under normal use and service for a period of one year from the date
of retail purchase by the original end-user purchaser. Products will not be warranted
if the serial number is removed or defaced.
This warranty shall be void upon transfer of ownership of this product and is
effective only when used in the United States.
Michley/Tivax agrees to repair or replace this unit at no charge, within the warranty
period, providing that the product is delivered to Michley/Tivax in its original
package or equivalent, fully insured, with all shipping charges prepaid and a return
authorization number listed on the outside of the packaging. A handling charge of $25
will be applied to any returned product found not to be defective. To honor this
warranty and to ensure the best service to our customer, Michley/Tivax requires the
following information to be included with the returned unit:
•A copy of the original sales invoice from your vendor.
•Model number & serial number of the unit.
•A detailed description of the problem, associate electrical connection and hardware.
A Return Authorization number can be obtained by faxing to 650 963-3585 or
Emailing support@tivax.com prior to returning the unit.
This warranty contemplates the owner will reasonably maintain this instrument or
product without alteration, negligent use, misuse, or abuse. Furthermore, any
unauthorized alteration of this device without written approval by Michley/Tivax
will void any warranty and the owner's right to operate this device.
This warranty presented above is exclusive and in lieu of all other expressed or
implied warranties. Any warranty applicable to this product is limited to the period
described above. In no event will Michley/Tivax be liable for any special, incidental,
or consequential damage, loss of revenue, or cost of replacement goods resulting
from the use of malfunction of this product to the equipment system on which it is
used. This warranty gives specific legal rights and you may have other rights that
vary from state to state.
Sew & Sew Electronic Sewing Machine SS 602
Model SS 602
For correct usage read these instructions carefully and
keep in a safe place for future reference.
Please note that this sewing machine is only suitable
for domestic use.

Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SS 602 and is the answer not in the manual?

Questions and answers

Summary of Contents for Tivax SS 602

  • Page 1: Instruction Manual

    This warranty shall be void upon transfer of ownership of this product and is effective only when used in the United States. Michley/Tivax agrees to repair or replace this unit at no charge, within the warranty period, providing that the product is delivered to Michley/Tivax in its original package or equivalent, fully insured, with all shipping charges prepaid and a return authorization number listed on the outside of the packaging.
  • Page 2 Caution: 1 This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions before using this appliance. DANGER ---To reduce the risk of electric shock: 1. An appliance should never be left unattached when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning.
  • Page 4 MACHINE SPECIFICATIONS SECTION . CARE OF YOUR MACHINE TROUBLESHOOTING Specification Item Problem Problem cause Amendment Sewing speed (Maximum): Over 350 s.p.m No power or the machine Stitch length: 3.5 mm (Maximum) ·Adaptor power inadequate ·Use compatible adaptor runs slowly Stitch width: 6.5 mm (Maximum) Stitch package (Stitch function): Skipping stitches...
  • Page 5: Table Of Contents

    SECTION . SEWING TABLE OF CONTENTS 8. Raise the presser foot, turn the cloth head SECTION . NAME OF PARTS back( because cloth is sewed forward, if Name of Parts....................1 you want to sew buttonhole, you need to Accessories.......................2 turn the direction of sewing.) SECTION .
  • Page 6: Section . Name Of Parts

    SECTION . NAME OF PARTS SECTION . SEWING NAME OF PARTS Manual Buttonhole Dialing 1. Pull out the drawer on your left side 1 Stitch choosing button button and push dialing button to the left so 2 Power switch & speed that presser foot is not in cloth feed adjusting button status.
  • Page 7: Accessories

    SECTION . SEWING SECTION . NAME OF PARTS Button Sewing Accessories Stitch selector: 2 to 3 1.Draw the accessory table and you will see an adjusting button for button sewing. Push the Foot pedal button to the left, thus, machine is in the state of button sewing.
  • Page 8: Section . Getting Ready To Sew

    SECTION . GETTING READY TO SEW SECTION . SEWING Connecting Machine to Power Supply Stitch choosing button Power supply plug Sewing straight stitch Outlet Sewing other stitches Machine socket When you push button to the right, green indicator of stitch pattern is on default Machine plug stitch 1.
  • Page 9: Presser Foot Lifter

    SECTION . SEWING SECTION . GETTING READY TO SEW Presser Foot Lifter Stitch Straight stitch: 1 Presser foot lifter Zigzag stitch: 2 to 12 The presser foot lifter raises and lowers the • Starting to sew presser foot. Raise the presser foot and position the fabric on the needle plate. Turn the handwheel and lower the needle to the point where you want to start.
  • Page 10: Changing Needle

    SECTION . GETTING READY TO SEW SECTION . GETTING READY TO SEW Stitch Selector (how to select stitches) Changing Needle Sewing guide display Needle clamp screw Stitch pattern in green indicator Needle clamp Reset key Choose the stitch you need and press stitch pattern button, green indicator will show Turn off the power switch.
  • Page 11: To Remove And Attach The Foot Holder

    SECTION . GETTING READY TO SEW SECTION . GETTING READY TO SEW Adjust the Needle Thread Tension for a To Remove and Attach the Foot Holder Thumb screw Zigzag Stitch Foot holder For an ideal zigzag stitch, the bobbin thread Presser foot lifter does not show on the right side (Top side) of the fabric, and the needle thread shows slightly...
  • Page 12: Bobbin Winding

    SECTION . GETTING READY TO SEW SECTION . GETTING READY TO SEW Adjust the Needle Thread Tension for a Bobbin Winding • Horizontal spool pin Straight Stitch Spool pin • Correct tension Spool holder Needle thread (Top thread) Bobbin thread (Bobbin thread) Lift up the spool pin .
  • Page 13: Bobbin Winding

    SECTION . GETTING READY TO SEW SECTION . GETTING READY TO SEW •Needle threader The position of the bobbin winder stopper is adjustable depending on the required Needle threader amount of thread on the bobbin. Using a screwdriver, loosen the screw one turn or Ring less ,so that you can adjust the position of the bobbin winder stopper.
  • Page 14: Removing The Hock Cover Plate

    SECTION . GETTING READY TO SEW SECTION . GETTING READY TO SEW • Removing the hook cover plate Threading the machine Hook cover plate release button Raise the thread take-up lever to Hook cover plate its highest position by turning the handwheel counterclockwise.

Table of Contents