Summary of Contents for mie cctv H.264 Digital Video Recorder
- Page 1 DVR User guide USER GUIDE H.264 Digital Video Recorder V1.0 This document contains preliminary information and subject to change without notice - 1 -...
-
Page 2: Safety Precautions
DVR User guide SAFETY PRECAUTIONS WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. NOTE: This equipment has been tested and found to comply with the limits for a class digital device, pursuant to part 15 of the FCC Rules. -
Page 3: Table Of Contents
DVR User guide Table of Contents 1. PACKING LIST....................... 5 2. PANEL LOCATION......................6 2-1 FRONT PANEL CONTROLS ............................. 6 2-2 16CH REAR PANEL CONNECTORS ..........................7 2-3 8CH REAR PANEL CONNECTORS ..........................8 2-4 4CH REAR PANEL CONNECTORS ..........................9 3. - Page 4 DVR User guide 5-8 SYSTEM SETUP ................................35 5-8.1 DISPLAY SETUP ............................... 36 5-8.2 DATE/TIME SETUP ..............................37 5-8.3 BUZZER & RELAY SETUP ............................39 5-8.4 SPOT SETUP ................................40 5-9 UTILITY SETUP ................................40 5-10 DIAGNOSTIC ................................. 41 6 BACKUP & SEARCH ....................42 6-1 BACKUP SETUP ................................
-
Page 5: Packing List
DVR User guide 1. PACKING LIST DVR SET CLIENT SOFTWARE CD REMOTE CONTROLLER BATTERY MANUAL SCREWS SATA HDD CABLE HDD BRACKETS POWER CABLE & Adaptor SATA Power Cable - 5 -... -
Page 6: Panel Location
DVR User guide 2. PANEL LOCATION 2-1 FRONT PANEL CONTROLS ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Control Keys Description ○ LOCK In LIVE mode, It locked all accounts. ○... -
Page 7: 16Ch Rear Panel Connectors
DVR User guide 2-2 16CH REAR PANEL CONNECTORS ○ ③ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ⑬ ○ MAIN monitor BNC port for the main monitor. ○ SPOT monitor BNC port to display full screen image of all installed cameras in sequence. ○... -
Page 8: 8Ch Rear Panel Connectors
DVR User guide 2-3 8CH REAR PANEL CONNECTORS ○ ○ ○ ○ ③ ○ ○ ○ ○ ○ ○ MAIN monitor BNC port for the main monitor. ○ SPOT monitor BNC port to display full screen image of all installed cameras in sequence. ○... -
Page 9: 4Ch Rear Panel Connectors
DVR User guide 2-4 4CH REAR PANEL CONNECTORS ○ ○ ③ ○ ○ ○ ○ ⑩ ○ ○ ○ ○ MAIN monitor BNC port for the main monitor. ○ SPOT monitor BNC port to display full screen image of all installed cameras in sequence. ○... - Page 10 DVR User guide 3. PRODUCTION SPECIFICATION Mode NO. 16CH operation System Linux NTSC/PAL Switch NTSC/PAL Switch Video System Auto Detect selectable selectable BNC*4,1.0Vp- BNC*8,1.0Vp- BNC*16,1.0Vp- Input p,75ohm p,75ohm p,75ohm CVBS 1CH BNC Video Spot 1CH BNC BNC*16 with Loop Out without loop termination s/w VGA Output...
-
Page 11: Live, Playback And Ptz Operations
DVR User guide Search Method Event, Time(Calendar) Remote Software CMS,IE Brower, Mobile Remote Virtual DVR-Same as local OSD Operation Speed 60FPS 120FPS Commu TCP/IP,HTTP,DDNS,SMTP(SSL) Network Service -nication ADSL,LAN,DHCP 3G Device WinCE5.0,6.0,Symbian,Iphone,PDA,Blackberry phone Gui Interface Supported GUI 32Bit True Color PTZ Protocol Pelco P/Pelco D/KND/Lilin/Samsung Internal CD-RW,DVD-RW... - Page 12 DVR User guide Table 4-1.1 Functions of remote control under LIVE mode Button Description Start/Stop recording. PLAY Start playing back the most recently recorded segment. Enable/Disable the Keypad function LOCK 1,2,3,4 Select the channel to monitor in full screen Turn on/off screen freeze function. ( =Pause Function) FREEZE Switch to quad display.
- Page 13 DVR User guide Button Description Enable/ Disable double screen size display. You can click on the channel name for choosing a Zoom/Zoom - specific channel. PIP/Zoom + Turn on picture-in-picture format. Click on the channel name can switch to other channels. Enable PTZ control.
- Page 14 DVR User guide Table 4-1.2 Graphical icons that will display after right-clicking your mouse under LIVE mode. Icon Description Resting the cursor on this icon will bring up the following four menu icons. Main menu. Search menu. Backup menu. PTZ mode. Turn on/off recording.
- Page 15 DVR User guide Table 4-1.3 Description of on screen graphical icons in LIVE mode Icon Description Recording is on Live Audio is on Live Audio is off Motion detected on the channel Sensor triggered on the channel Video loss detected on the channel USB device detected DVD burner is detected Connected to the LAN cable.
-
Page 16: Playback Mode
DVR User guide Icon Description Image quality (High/Low) Full screen Record Snap shot Record and snap shot file saving path setup 4-2 PLAYBACK Mode Switch to PLAYBACK mode by pressing “PLAY” under the LIVE mode, the graphical icon will show up on the upper center of the screen and the operation panel (look at the below picture) will show up at right lower corner of the screen. - Page 17 DVR User guide playback speed is shown in the upper center of the screen. Fast rewind. Each press increases the speed to the next level. There are six speeds: 2X, 4X, 8X, 16X, 32X and 64X. Fast forward. Each press increases the speed to the next level. There are six speeds: 2X, 4X, 8X, 16X, 32X and 64X.
-
Page 18: Ptz Mode
DVR User guide 4-3 PTZ Mode Switch to the PTZ mode by pressing “PTZ” button under the LIVE mode. The PTZ icon will appear on upper center side of screen and the control panel will appear on the down right side of screen. Table 4-3.1 Remote Control functions under the PTZ mode Button Description... - Page 19 DVR User guide ＊ Set current PTZ location as the start of line-scan. ＊ Activate auto line-scan. FREEZE Set current PTZ location as the end of line-scan.＊ ZOOM ＊PTZ communication protocols from different brands aren’t compatible 100% sometimes. Therefore, some of these functions may be unavailable.
-
Page 20: Main Menu Setup
DVR User guide PTZ IRIS open, PTZ IRIS close. Below functions need support from specific PTZ manufacturer. Please check user manual of yo ur PTZ for more detail. AUX 1,「AUTO」Key ＋ Number key「1」 AUX 2,「AUTO」Key ＋ Number key「2」 AUX 3,「AUTO」Key ＋ Number key「3」 AUX 4,「AUTO」Key ＋... - Page 21 DVR User guide Table 5-0.1 Some definition of virtual keyboard. Item Description Switch between capital and small letters. Switch between numbers and letters. Press to cancel the setup, and re-choose the login account. Delete the last character. Enter to identify the password. It will enter the setup menu, If the pas sword is verified.
-
Page 22: Record Setup
DVR User guide Table 5-0.2 The operation of remote control under the setting menu Item Description Switch to different options under one item Switch to different items MENU Save setup and back to LIVE mode Back to Upper level of menu without saving ENTER Enter the menu, or display virtual keyboard PS. -
Page 23: 5-1.1 Quality & Frame Rate Setup
DVR User guide 5-1.1 Quality & Frame Rate Setup Item Description Normal setup/ Select recording mode event setup Resolution Select recording resolution: 320x240, 720x240, 720x480 Record Type Setup quality and FPS separately for record type. Check/uncheck the box enable/disable selected channel recording Quality Select quality: Lowest/ Low/ Normal/ High/ Highest Select recording frame rate. -
Page 24: 5-2.1 Motion Setup
DVR User guide 5-2.1 MOTION SETUP Item Description Check the box to Enable/Disable popup screen function for all channels. When Motion Popup motion is detected in LIVE mode, the detected channel image will pop up in full screen display. You can setup independently for each channel. Check the box to Enable/Disable Motion Detection for each channel. -
Page 25: 5-2.2 Sensor Setup
DVR User guide Item Description Switch between “select” and “deselect” for cursor-dragging function Mask Mouse Selection All Area Detection Select entire screen as detection area. Mask All Area Deselect entire detection area. Continue Continue setup Exit & Save Save setup and leave 5-2.2 SENSOR SETUP - 25 -... -
Page 26: Schedule Setup
DVR User guide Item Description Sensor Popup Check the box to Enable/Disable popup screen function for all channels. When Sensor is detected in LIVE mode, the detected channel image will pop up in full screen display. All Off Set all sensor off Set all sensor polarity low All Low All High... -
Page 27: 5-3.1 Schedule Record Setup
DVR User guide 5-3.1 Schedule Record Setup Click on the time on the left side. The setup menu will be displayed. You can have detail setup by dates, Ti me and event. 5-3.2 Holiday Setup Since holidays are different by different country and region, you can setup the holiday of your location accordingly. -
Page 28: Camera Setup
DVR User guide 5-4 CAMERA SETUP Item Description You can setup independently for each channel. Mask Check the box to Enable/Disable mask function for LIVE mode Drag the bar or press ◀ ▶ to adjust Sharpness of your camera from value 1 to 255. Sharpness The default value is 128. -
Page 29: 5-5.1 Permission Setup
DVR User guide Item Description Check to activate the user’s account. Username Set up username Set up password for each user. Password is 8-digits required and can be mixed by Password letters and numbers with case-sensitive. Letters can be mixed with capitals or lowercases. -
Page 30: 5-5.2 User Picture Setup
DVR User guide 5-5.2 User Picture Setup User can select picture wish to be changed to from hard drive. 5-6 NETWORKING SETUP - 30 -... -
Page 31: 5-6.1 Networking Setup
DVR User guide Item Description Connect type Setup mode for network connection: (DHCP / LAN / ADSL). Enter to set up HTTP HTTP Setup DDNS Setup Enter to set up DDNS Mail Setup Enter to set up mail NG SETUP There are three ways to connect to the network as followed. -
Page 32: 5-6.2 Http Setup
DVR User guide Enter IP address provided by ISP (Internet Service Provider) IP Address Subnet Mask Enter IP address of Subnet Mask provided by ISP Gateway Enter IP address of Gate way provided by ISP Enter DNS address provided by ISP. (Note: The correct DNS address must be entered for DDNS function). -
Page 33: 5-6.3 Ddns Setup
DVR User guide Check to enable HTTP server. Users can remotely access into the DVR over the Enable HTTP Server network if the HTTP function was activated. Enter a valid port value from 1 up to 65000. The default value is 80. Port Auto Assign each channel with its maximum accessible fps... -
Page 34: 5-6.4 Mail Setup
DVR User guide 5-6.4 Mail Setup When event occurs (VLOSS, MOTION, SENSOR), email will be sent to the receiver account automatically. Item Description Enable E-mail Check the box to enable/disable E-mal Notification function. Notification SMTP Server Enter to set up SMTP Serve name. User Name Enter to set up User Name. -
Page 35: System Setup
DVR User guide Item Description Enable PTZ Click the box to Enable/Disable PTZ function for each channel. Protocol Set up the protocol of PTZ cam. The supported protocol are PELCO-P, PELCO-D, KND, LI-LIN, SAMSUNG, LG, AVTECH and so on. ◀ ▶ PTZ ID Click or press to set up PTZ ID. -
Page 36: 5-8.1 Display Setup
DVR User guide Item Description DVR Name The name of DVR will be shown when users login from remote access. DVR Location The location of DVR will be shown when users login from remote access Click or press ▼ to select OSD language from English, Traditional Chinese, Simplified Language Chinese, Japanese, Deutsch, French, Espanol, Portuguese, Italian, Pyccknn, and so on. -
Page 37: 5-8.2 Date/Time Setup
DVR User guide Set up this function when the screen on CRT monitor is flickered Set up the color of border in LIVE , PLAYBACK mode.（Red, Green, Blue） Border Color 5-8.2 DATE/TIME SETUP Item Description Time Format 12HOURS/ 24HOURS Date Format MM-DD-YY/DD-MM-YY/YY-MM-DD Choose the position of Time and Date display Date/Time Position... - Page 38 DVR User guide 5-8.2.2 TIME ZONE AND DAYLIGHT SAVING TIME SETUP Set up time zone and activate Daylight Saving Time function according to user’s DVR location. Item Description Select Time Zone Enter to modify GMT from GMT- 13 to GMT+ 13 Daylight Saving Time Turn on/ off Daylight Saving Time 5-8.2.3 INTERNET TIME SETUP...
-
Page 39: 5-8.3 Buzzer & Relay Setup
DVR User guide 5-8.3 BUZZER & RELAY SETUP Item Description Key Tone Enable/Disable keystrokes. Enable/Disable buzzer operation when the alarm is triggered for sensor, Buzzer motion and vloss (Video Loss). Enable/Disable the signal to be sent to the RELAY OUT blocks when the Relay alarm is triggered for sensor, motion and vloss. -
Page 40: 5-8.4 Spot Setup
DVR User guide 5-8.4 SPOT SETUP The DVR has two modes of video output; one is main video output, the other is spot video output. SPOT control to switching the channels the system cycles through in SPOT mode. User can monitor every channel in the SPOT mode. -
Page 41: Diagnostic
DVR User guide Item Description Select to enter hard disk initialization menu. Please stop recording before HDD Initialization entering this menu. Enter the menu, system will show all the data (model / volume) of HDD that installed in DVR. Check the HDD you’d like to initialize then press “Start”. -
Page 42: Backup & Search
DVR User guide MAC Address of DVR HDD Status HDD number Volume HDD Capacity Used Rate Percentage of space used on HDD. Shows HDD status. USING means the HDD is being used for recording now Status GOOD/BAD means the HDD has a known/unknown format for the DVR. (Note: Please initialize your newly-installed HDD before using it.) Format Time The latest format time of HDD... -
Page 43: Search Setup
DVR User guide Recalculate the available space of backup device. (not available for PC backup) Refresh Required Space Show the size of the backup file Calculate Calculate the size of backup file Start backup operation. Be sure to calculate the size of backup file BEFORE Start operating backup. - Page 44 DVR User guide The DVR automatically records events with type, time and channel information included. If there is recording data for an event, a yellow signal will be shown on the left side of time information. Rest your cursor under the line and press “enter”, or left click your mouse to playback the recording data.
-
Page 45: 6-2.2 Time Search
DVR User guide 6-2.2 TIME SEARCH TIME SEARCH can search for the specific time of recording data to playback. Press “Enter” or left click on □ the desired date to playback. Note that dates with recording data are marked with a red square “ “Syste m will start playing back according to the date you selected. -
Page 46: How To Search Via Web Monitoring Or Program
DVR User guide 6-3 How to search via Web monitoring or Program Step One：Enter the IP address and DVR port of DVR in IE browser (DVR port : Default is 80) Step Two: Windows as below will show up. Please enter the user name and password. Default user name and password is admin/123456. -
Page 47: 6-3.1 Web Monitoring
DVR User guide Step Three: After entering ID and PW, You can see the Connection screen as below. image. => For Web Monitoring => For Client Program 6-3.1 Web Monitoring. Please Choose “Internet Explorer 6,7,8” in order to do Web monitoring Then It will be shown the connection screen as below image. -
Page 48: Client Program Operation
DVR User guide After entering Information, You can see the Connection screen as below. image. It can allow you to remotely access and control the DVR from PC. 6-4 Client Program Operation Open the file “Remote.exe”; enter the information of DVR “IP address”, “Port” “DVR ID” and “Password”... - Page 49 DVR User guide Note 1: Known VGA card that support DirectX9.0 currently: NVIDIA: Geforce FXseries, Geforce 6series, Geforce 7series, Geforce 8series, Geforce 9series, Geforce 200series, etc. visit:http://en.wikipedia.org/wiki/Comparison_of_Nvidia_graphics_processing_units ATI: Radeon R300series, Radeon R400series, Radeon R500series, Radeon R600series, Radeon R700series, Radeon HD 3xxx IGPseries, Mobility Radeonseries (9500 above), Mobility Radeon Xseries, Mobility Radeon HDseries, or FireGL Vseries etc.
-
Page 50: Mobile Application Installation And Usage
DVR User guide Table 6-4.2 Network Bandwidth Requirement Reference Quality Highest Normal Lowest Resolution 16CH 6.9~7.9Mfps 3.7~5.8Mfps 1.2~2.4Mfps 6.5~8.2Mfps 3.6~5.8Mfps 1~2.6Mfps 6.6~8Mfps 3.8~6Mfps 1.4~3Mfps 6.2~7.6Mfps 3.6~5.7Mfps 1.2~2.5Mfps 16CH 3.6~5.4Mfps 1.9~3.5Mfps 890K~1.7Mfps 3.3~5.6Mfps 1.8~3.7Mfps 900K~1.6Mfps 3.4~5.1Mfps 1.8~3.8Mfps 850K~1.8Mfps 3.7~6Mfps 1.6~4Mfps 870K~1.8Mfps 16CH 1.8~3Mfps 1.2~2.2Mfps... -
Page 51: 7-1.1 Mobile Application Installation
DVR User guide 7-1.1 Mobile Application Installation Please follow the steps cited below to perform the mobile device surveillance function. Step 1: The mobile application called “DVRH264.jar” need to be installed in your mobile device. The application can be downloaded directly from the manufacturer’s website to your mobile or; alternatively, it can be transferred to your mobile device from the CD that packed with DVR through Bluetooth or USB cable. - Page 52 DVR User guide 7-1.2.2 Logging Onto the DVR Use the Login command to log onto a DVR and monitor live images. If multiple DVRs have been added to the mobile application, they will be listed by name, you can select one to log onto. A confirmation message might show up for network charge before connecti on.
-
Page 53: 7-1.3 Live Monitoring Operation
DVR User guide 7-1.2.4 Delete the Login Information of DVR “Delete” command can be used to remove the DVR information if it is no longer useful. Select the DVR on the name list then choose “Delete” 7-1.3 Live Monitoring Operation This paragraph describes some operation under the LIVE monitoring mode in your mobile device. - Page 54 DVR User guide There will be 5 levels for your to choose: Low、 、 、 、 Normal、 、 、 、 Middle、 、 、 、 High and Highest. 7-1.3.3 Channel Display Select “Single” under the “Menu”, there will be all channels of your DVR in list for you to choose.
-
Page 55: Mobile Application Installation And Operation For Windows Mobile System
DVR User guide 7-1.3.6 Alarm This application not only allows you to remotely monitor through mobile device but receive the alarm that has been triggered by events such as Motion Detected, Sensor Triggered and Vloss. Graphical icons below will be shown on the status: : Motion detected : Sensor triggered : Video loss... -
Page 56: 7-2.2 Mobile Application Operation
DVR User guide Step 2: Install the application software “Jrviewer.CAB” and “H264Pocket.CAB” in your mobile device, two folders named ”Jrviewer” and “H264Pocket” will be created. It might be installed automatically after downloading; otherwise, select it from the downloading file for installation. 2.2 Mobile Application Operation After the installation, enter the Program Files menu in your mobile device to run files named “Jrviewer”... -
Page 57: 7-2.3 Operation Under The Live Monitoring
DVR User guide The operation of Jrviewer The operation of H264Pocket 7-2.3 Operation under the LIVE monitoring. After successful logon the DVR, press “View” to bring up operation menu. You can choose the channel, resize the image, choose the quality, and turn on/off the status bar, alarm, full screen display….etc 7-2.3.1 Operation uner the LIVE monitoring for Jrviewer Item Function... - Page 58 DVR User guide Graphical icons indicated below will be shown on the status bar if there is event such as motion detected, sensor triggered and video loss to be detected on any channel. You can also uncheck the “Status Bar” to inactivate this function. Status Bar Status Bar Icon...
-
Page 59: Backup Viewer
DVR User guide Alarm through your mobile device can be triggered if there is Alarm Alarm event to be detected. You can also uncheck the “Alarm” under the “View” to inactivate this function. You can choose one channel to display in full screen by check Full Screen Full screen display this function. - Page 60 DVR User guide Step 2. Enter DVR →Main Menu → Network Setup → DDNS. Activate DDNS functions and input ID and Password which you registered via DDNS Server - 60 -...
Need help?
Do you have a question about the H.264 Digital Video Recorder and is the answer not in the manual?
Questions and answers