Learning Resources LER 4403 User Manual

LER 4403
Easi-Speak
™
Sound Station
Please Read All Instructions Carefully Before Using
User Guide
Easi-Speak Sound Station User Guide
™
• Please retain these instructions for future reference
• Sound Station contains a rechargeable NiMH
battery pack
• Do not attempt to remove the battery
• The external charger must be regularly examined for
potential hazard, such as damage to the cable or cord,
plug, enclosure or other parts. If such damage occurs,
do not use the Sound Station until that damage has
been fixed properly
• Only charge rechargeable batteries under adult
supervision
• Do not short-circuit the supply terminals
• Do not allow your Sound Station to come into contact
with water or other liquids
• In the event of an electro-static discharge, your Sound
Station may malfunction. In this case, you may need to
turn it off to reset it
• Warranty is void if the case is opened for any reason
• The warranty does not cover any data loss from the
Easi-Speak unit nor any consequential loss of
™
information
2
Easi-Speak Sound Station User Guide
™
FCC compliance
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH
MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO
OPERATE THE EQUIPMENT.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and
receiver
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician
for help
3
Easi-Speak Sound Station User Guide
™
Know Your Sound Station
Power LED
On/off volume
Stereo speakers
Jack plug – connects to headphone
socket on your Easi-Speak
Line-in socket
6 Headphone
sockets
D.C. socket for
external charger
4
Easi-Speak Sound Station User Guide
™
Using Your Sound Station
The Easi-Speak ™ connects to the Sound Station via the
headphone output socket. With the USB cap in place,
turn the Easi-Speak until the headphone socket faces
™
the jack plug on the Sound Station and push it into
place. Turn the Sound Station on and press the
Easi-Speak play button, then adjust the Sound Station
™
volume control to the desired level. It may be necessary
to increase the Easi-Speak ™ volume, before docking, to
achieve the best results (the volume controls are not
accessible once the Easi-Speak ™ is docked).
Power LED
The power LED is illuminated whenever the Sound
Station is turned on. When not in use, turn your Sound
Station off by rotating the volume switch until you hear
a "click" and the red power light turns off.
Charging the Battery
Sound Station is supplied with a partially charged
battery and can be used immediately without charging
first. The battery can be charged by connecting the
external power supply to the power input.
• Even when the battery is fully discharged, Sound
Station will operate normally when the external
power supply is connected. The battery will also be
charging at this time.
5