Display; Display Assembly; Removing The Display Assembly - Dell XPS L511z Service Manual

Display

WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell™ is not covered
by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery
(see "Removing the Battery" on page 17) before working inside the computer.

Display Assembly

Removing the Display Assembly

1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the base cover (see "Removing the Base Cover" on page 13).
3 Remove the battery (see "Removing the Battery" on page 17).
4 Follow the instructions from step 5 to step 16 in Removing the System
Board.
5 Remove the six screws that secure the display assembly to the palm-rest
assembly.
6 Note the routing of camera cable, display cable, and Mini-Card antenna
cables and remove the cables from the routing guides.
7 Lift the palm-rest assembly away from the display assembly.
19
81
Display