1. Manuals
  2. Brands
  3. DKT Comega Manuals
  4. Gateway
  5. CPE
  6. User documentation

DKT Comega CPE User Documentation

Cpe
Hide thumbs
Table of Contents

Advertisement

Quick Links

DKTCOMEGA CPE User Documentation
CPE User Guide v_04_07
Page - 1
DKTCOMEGA
Fanoevej 6
DK-4060 Kirke Saaby
+45 4646 2626
+45 4646 2625
mail@dktcomega.com
www.dktcomega.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CPE and is the answer not in the manual?

Questions and answers

Summary of Contents for DKT Comega CPE

  • Page 1 DKTCOMEGA CPE User Documentation DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 1 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 2: Table Of Contents

    Table of content Introduction ..........................3 The boot process of the CPE node .................... 4 DHCP Settings ........................6 TFTP Settings ........................9 Custom configuration ......................11 Device script commands ......................13 Explanation of feature settings ....................19 VLAN settings ........................19 Provider mode (Double tagging, Q-in-Q) ................

  • Page 3: Introduction

    As an option a VoIP (SIP based) plug-in module can be installed, which will give 2x RJ-11 analogue phone connections. The CPE is provisioned via DHCP/TFTP, however also SNMP can be used to for surveillance and settings. Following DKTCOMEGA product codes are supported: ...

  • Page 4: The Boot Process Of The Cpe Node

    The boot process of the CPE node The boot process is split in two: First the node issue a dhcp request with dhcp option 60 set to <file name>vx_xx (where x_xx is the version number of the firmware). Afterwards the node start it's operation system (OS). The OS also issue a dhcp request, with dhcp option 60 set to the version of the software.
  • Page 5 Also telnet daemon must be started, with the use of telnetd -l /bin/sh command in the script DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 5 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 6: Dhcp Settings

    DHCP Settings The CPE requires a dhcp server connected to the fiber WAN port before power on. As an example we have used Linux Kubunto platform and installed the following component via adept  dhcp3  tftpd Make sure that DHCP server has its unique static IP address settings, so it doesn’t conflict with its own leasing of IP Addresses.
  • Page 7 3) CPE requests in its LINUX Boot-up process, where configuration file is requested: Option: 53, 61, 60, 50, 54, 55, 1, 3, 28, 66, 67 To edit DHCP Server Setup for dhcp3, edit the DHCP setup configuration file: sudo kate /etc/dhcp3/dhcpd.conf...
  • Page 8 2_00 and forward ---# --------------- END OF UPGRADE ------------------- # The following is needed in order for the CPE to download the configuration. Remember to place this configuration file in TFTPBOOT directory. Remember to assign correct eth interface, subnet/mask, IP address range, TFTP-server name and bootfile-name below subnet <Subnet>...

  • Page 9: Tftp Settings

    TFTP Settings After the DHCP server is configured a TFTP server should be configured, so firmware image and configuration file for the CPE can be downloaded correctly. As an example we have used Linux tftpd and xinetd The TFTP configuration file must be edited. And a tftpboot directory must be...
  • Page 10 # CONFIGURATION FILE SECTION: insert the following socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = /tftpboot disable = no DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 10 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 11: Custom Configuration

    DK-4060 Kirke Saaby Please notice that text editors using Carrier Return for each line is NOT supported. The text editor should use Line Feed for line separation. +45 4646 2626 CPE User Guide v_04_07 Page - 11 +45 4646 2625 mail@dktcomega.com...
  • Page 12 # port=3, bucket=0, rate=1000kb/S, bytecounter=layer3,limitaction=flowcontrol switch --port-map-to-pirl-bucket 4:0 # join port 4 to bucket 0. Please notice that thisfeature is NOT valid for the Gigabit CPE #Downlink rate (Total for WAN 2Mbps) switch --set-port-ingress-rate-limit 0:1:2000:3:FC # port=0(WAN), bucket=0, rate=2Mb/S, bytecounter=layer3,...

  • Page 13: Device Script Commands

    Device script commands The following commands are supported in the script that will be downloaded to the CPE via TFTP during boot-up process. This command is used to configure the switch in the unit. The command takes one or more of the following parameters, with the syntax...

  • Page 14: Link Status

    --enable-port-flowcontrol=PORT:(1|0) Enables/disables flow control on the port --get-enable-port-flowcontrol=PORT:(1|0) Prints the status of flow control on the port DKTCOMEGA Fanoevej 6 Rate control: DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 14 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 15 This makes IEEE tags to used priority to IP4/IP4 fields if both exists. --get-port-map-rule=PORT DKTCOMEGA Prints the status of if IEEE tags is prioritized over IP4/IP4 fields Fanoevej 6 if both exists. DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 15 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 16 Prints the status of blocking untagged frames DKTCOMEGA # Note from firmware revision earlier than 02_05 Fanoevej 6 --add-vtu-entry=VID:WAN:LAN1:LAN2:LAN3:LAN4:CPU:NRL-ENABLE DK-4060 Kirke Saaby Adds an entry to the VTU table. +45 4646 2626 CPE User Guide v_04_07 Page - 16 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 17 IEEE 802.1Q for the port, fallback mode DKTCOMEGA 2=check, enables IEEE 802.1Q for the port, check mode Fanoevej 6 3=secure, enables IEEE 802.1Q for the port, secure mode DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 17 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 18 Flushes all counter for a single port. --get-port-rmon-counters=PORT, Prints the RMON counters for a port. DHCP Option 82: supported from firmware revision 03_00 and later, in the 794xx series (1 GbE CPE). --set-port-dhcp-option82=PORT:enable[:<optional text>] (1Gb) Enable or disable DHCP option 82 (DHCP relay agent).

  • Page 19: Explanation Of Feature Settings

    When the traffic egress the LAN port the vlan tag is removed. The syntax for the command is: DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 19 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 20 211 is tagged ingress on both WAN and LAN port 1, whereas VLAN 221 is tagged ingress on WAN and untagged ingress on LAN port 1. All other ports are not member of the VLANs. A management VLAN 951 is defined (untagged), which enables communication between system operator and CPE for management purposes (untagged). DKTCOMEGA...

  • Page 21: Provider Mode (Double Tagging, Q-In-Q)

    VLAN from other IEEE 802.1Q VLANs in a hierarchical fashion that is compatible Fanoevej 6 DK-4060 Kirke Saaby with IEEE 802.1Q aware switches. This method places an extra or Double Tag in +45 4646 2626 CPE User Guide v_04_07 Page - 21 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 22: Isolate Lan Ports

    The LAN ports are disabled per default. Therefore the configuration file should DKTCOMEGA enable the LAN ports by issuing the command: Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 22 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 23: Set Lan Port Speed

    The device supports IGMP snooping, and join messages received from clients on the LAN ports will be handled by the CPE CPU, which will control which ports that belongs to which multi cast group. IGMP snooping has to be enabled per port but is...
  • Page 24 In some cases race conditions can occur, if the CPE filter times out before a client has responded to an IGMP query, hence signal will be lost, as CPE expect that the client is no longer member of the multicast group.

  • Page 25: Ingress Rate Limitation

    Known multicasts, MC # this should be used only if you know the multicast traffic, must be present in the ATU DKTCOMEGA Please note that Gigabit CPE doesn’t support a multi port bucket based structure, as ingress rate limitation Fanoevej 6 DK-4060 Kirke Saaby works at a port based level, so not more than one port can be associated with a bucket.
  • Page 26 # port=3, bucket=0, rate=1000kb/S, byte counter=layer3, limitation = drop switch --set-port-ingress-rate-limit 3:0:1000:3:DROP # join port 4 to bucket 0, Please notice that this feature is NOT valid for the Gigabit CPE switch --port-map-to-pirl-bucket 4:0 #Downlink rate (Total for WAN 2Mbps)
  • Page 27 --port-enable-vid-nrl=2:1 switch --port-enable-vid-nrl=3:1 switch --port-enable-vid-nrl=4:1 DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 27 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 28: Egress Rate Limitation

    DKTCOMEGA Support for remote logging via syslog (RFC 3164) Fanoevej 6 DK-4060 Kirke Saaby To start syslog, enter the following line in your configuration file +45 4646 2626 CPE User Guide v_04_07 Page - 28 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 29: Surveillance Via Snmp

    -> support -> firmware. These can be loaded into a standard MIB browser or 3 party SNMP management system. CATV setup DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 29 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 30: Quality Of Service (Qos)

    Same scenario can be made based on traffic type and/or Source/Destination MAC addresses DKTCOMEGA is recommending that CPU port always is granted high priority as it will ensure that management traffic is passed to the internal CPU on the device.
  • Page 31 --set-ip4ip6-queue-map=57:0 # DiffServ value of 57 will go to queue with lowest priority Fanoevej 6 switch --set-ip4ip6-queue-map=56:0 # DiffServ value of 56 will go to queue with lowest priority DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 31 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 32: Reboot

    RAM memory, which means that the device would need to have Fanoevej 6 the configuration loaded at every boot. DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 32 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 33: Dhcp Option 82

    ID of a client, during any IP address allocation. When DHCP Option 82 is enabled on the CPE, it inserts the per port defined information into the DHCP packets as they pass through the CPE on their way to the DHCP server.

  • Page 34: Lldp/Edp/Cdp

    # combinations of the above is also possible /etc/init.d/lldpd start –CEF # Starts LLDP and CDP/EDP/Foundry DP on WAN port DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 34 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 35: Support For Ssh

    # Save configuration to flash memory, same SSH key is used at every boot save_configuration Now it is possible to log into the CPE as the user ”Administrator” (case sensitive) through SSH. ssh Administrator@<IP address> ssh -l Administrator <IP address>...
  • Page 36 SSH daemon is started. Procedure for changing SSH password on all CPE units. If password for Administrator is to be changed for all CPE's do the following: 1) Log into one CPE via ssh 2) change user to root with command su...
  • Page 37 # save configuration to flash memory, now the password is saved locally on each CPE DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 37 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 38: Voip Ata Plug-In Module

    "dkt2code_5_05_00.ece"; A bridge between the ATA and the CPE Linux has to be established. If the ATA has to be configured on a separate VLAN than for CPE management (untagged), the following command should be used:...

  • Page 39: Web Interface

    Web Interface Alternatively the ATA can be managed via HTTP browser by inserting http://<IP Address>  User name: <to be disclosed by DKTCOMEGA>  Password: <to be disclosed by DKTCOMEGA> System Parameters Generic settings for the ATA plug-in module can be configured under System ...

  • Page 40: Dns Configuration

    Fanoevej 6 Enable automatic reconnection on link loss (retains DK-4060 Kirke Saaby net isp reconnect on link loss initial configuration if disabled), CURRENTLY NOT IMPLEMENTED +45 4646 2626 CPE User Guide v_04_07 Page - 40 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 41 Please notice that this can cause delays in making and receiving calls if the STUN service is not used, but enabled. +45 4646 2626 CPE User Guide v_04_07 Page - 41 +45 4646 2625 mail@dktcomega.com...

  • Page 42: System Identification

    System Identification: DKTCOMEGA Parameter Description Default Fanoevej 6 DK-4060 Kirke Saaby (C) 1994-2009 ata copyright notice DKTCOMEGA’s copyright notice DKTCOMEGA +45 4646 2626 CPE User Guide v_04_07 Page - 42 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 43 (as assigned) Unique device ID including Ethernet MAC used for net unique device id (as assigned) DHCP and update operations DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 43 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 44: Voip Accounts

    Default provider selection Fanoevej 6 DK-4060 Kirke Saaby Alternate provider to use when selected voip provider alternate provider is unavailable (0 to disable) +45 4646 2626 CPE User Guide v_04_07 Page - 44 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 45: Voip Parameters

    Jitter buffer depth at startup in msec rtp jitter buffer minimum depth Jitter buffer minimum depth DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 45 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 46: Sip Parameters

    User-Agent header for outbound responses if not DKTCOMEGA sip user agent DKTCOMEGA 3.27 empty Fanoevej 6 DK-4060 Kirke Saaby sip require user name Require username to match for incoming calls Disabled +45 4646 2626 CPE User Guide v_04_07 Page - 46 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 47 6 Belcore-r6 pattern 6 Fanoevej 6 DK-4060 Kirke Saaby Telephone event name to produce distinctive ring sip distinctive ring names 7 Belcore-r7 pattern 7 +45 4646 2626 CPE User Guide v_04_07 Page - 47 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 48: Ipbx Parameters

    Additional voice receive gain in dB units DKTCOMEGA Fanoevej 6 ipbx voice tx gain Additional voice transmit gain in dB units DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 48 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 49 Time in msec to delay hookflash action in case of ipbx hookflash delay hangup DKTCOMEGA Fanoevej 6 ipbx answer hangup delay Time in msec for answer side hangup delay DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 49 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 50: Regionalization

     represent the frequency (Hz) Fanoevej 6 tone_elementX_freq tone_elementX_db DK-4060 Kirke Saaby and signal level (dB) of each tone. A negative frequency is used to +45 4646 2626 CPE User Guide v_04_07 Page - 50 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 51 19}, {500, 500}} Fanoevej 6 Re-order (network/fast busy) composite {2, 2, 0, {480, -19, 620, - ipbx reorder tone DK-4060 Kirke Saaby tone pattern 19}, {250, 250}} +45 4646 2626 CPE User Guide v_04_07 Page - 51 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 52 {20, 2, 0, {500, 0}} DKTCOMEGA ipbx message waiting ring splash Audible message waiting ring pattern {20, 2, 0, {500, 0}} Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 52 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 53 (GR) SLAC receive gain in dB units DK-4060 Kirke Saaby slac port tx gain (GX) SLAC transmit gain in dB units +45 4646 2626 CPE User Guide v_04_07 Page - 53 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 54 9 (many) Fanoevej 6 || 100nF impedance DK-4060 Kirke Saaby SLAC commands to synthesize 800 ohm + 50nF slac impedance commands 10 (many) impedance +45 4646 2626 CPE User Guide v_04_07 Page - 54 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 55 DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 55 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 56: Subscription Services

    Enables customer use of block last caller service Enabled ipbx three way calling service Enables customer use of three way calling service Enabled DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 56 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 57: Port Configuration

    2 regardless of whether the second call was incoming or not (i.e. hookflashing will switch between the two active calls). +45 4646 2626 CPE User Guide v_04_07 Page - 57 +45 4646 2625 mail@dktcomega.com...

  • Page 58: Operating Mode

    Hot/warm dial string (empty) DKTCOMEGA Fanoevej 6 Sets the SLAC line polarity during dialing (forward ipbx polarity dialing Forward DK-4060 Kirke Saaby or reverse) +45 4646 2626 CPE User Guide v_04_07 Page - 58 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 59 "[]" selection group of candidate digits DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby "[^]" exclusion group of digits +45 4646 2626 CPE User Guide v_04_07 Page - 59 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 60 VoIP provider “area code.” Recognize a “**” DK-4060 Kirke Saaby string starting with , and proceeding with any of the digits 1-9. defines “**” “e#” +45 4646 2626 CPE User Guide v_04_07 Page - 60 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 61 After that point, the ATA continues to collect digits until the user pauses two seconds. Then the ATA sends the dialed string to the service provider. DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 61 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 62: User Configuration

    1 Number to forward entry 1 (empty) DKTCOMEGA (repeated) Fanoevej 6 DK-4060 Kirke Saaby ipbx call forward list 30 Number to forward entry 30 (empty) +45 4646 2626 CPE User Guide v_04_07 Page - 62 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 63 Enables caller ID for outbound calls Enabled ipbx caller id waiting enable Enables caller ID during call waiting Disabled DKTCOMEGA Message Waiting: Fanoevej 6 DK-4060 Kirke Saaby Parameter Description Default +45 4646 2626 CPE User Guide v_04_07 Page - 63 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 64: Feature Code Assignments (*55 - *99)

    Cancel priority call forward DKTCOMEGA Fanoevej 6 ipbx fc disturb accept disable Disable do not disturb accept call feature DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 64 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 65 Cancel call forward when busy ipbx outgoing block enable ipbx outgoing block disable ipbx fc unattended transfer DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 65 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 66: Wifi Plug-In Module

    The default TFTP server is the same as used for the CPE configuration file. Note when Wifi is installed, LAN port 4 of the CPE switch is used as dedicated Wifi port. All VLAN and QoS parameters related to LAN port 4 must be configured AFTER the “enable_wifi”...
  • Page 67 IGMP functionality, Enable or Disable igmpEnabled DKTCOMEGA Fanoevej 6 NAT functionality, Enable or Disable natEnabled DK-4060 Kirke Saaby IP based port filtering, Enable or Disable IPPortFilterEnable +45 4646 2626 CPE User Guide v_04_07 Page - 67 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 68 B/G protection technology is CTS-To-Self. It will try to reserve the BGProtection throughput for 11bg clients association. TxAntenna RxAntenna DKTCOMEGA Fanoevej 6 0: long preamble, 1: Short preamble TxPreamble DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 68 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 69 0;0;0;0 VLANPriority VLAN priority WscConfMode WPS function, bitwise. DKTCOMEGA WscConfStatus It shows the current status of the WPS process. Fanoevej 6 DK-4060 Kirke Saaby WscAKMP +45 4646 2626 CPE User Guide v_04_07 Page - 69 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 70 11n performance parameter. Enable it if needed. HT_LinkAdapt Applicable to HT Physical Mode HT_OpMode Applicable to HT Physical Mode DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby HT_MpduDensity Applicable to HT Physical Mode +45 4646 2626 CPE User Guide v_04_07 Page - 70 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 71 Input the port of the Radius server. The default port is 1812. 1812 RADIUS_Key DKTCOMEGA;DK TCOMEGA;DKTC DKTCOMEGA Authentication Key OMEGA;DKTCOM Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 71 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 72 WEP Key 2 Key3Str4 WEP Key 3 Key4Str4 WEP Key 4 FixedTxMode Fixed TX mode HT;HT;HT;HT MNGVLANID Management VLAN ID DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 72 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 73: Appendix 1 - Ata Configuration File

    Appendix 1 – ATA configuration file Please notice that the ATA supports provisioning of the configuration file in both clear text as well as in encrypted format. Default is clear text, if encrypted format is preferred, please consult DKTCOMEGA for further details. # Accounts ata_service_name&3c0=DKTCOMEGA ata_factory_name&300=Factory...
  • Page 74 DKTCOMEGA Fanoevej 6 ata_configuration_update_random_delay&3c0=240 DK-4060 Kirke Saaby ata_configuration_update_error_retry_delay&3c0=120 +45 4646 2626 CPE User Guide v_04_07 Page - 74 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 75 # ATA Maintenance ata_help_url&3c0=help.html ata_logo_url&3c0=atalogo.jpg net_syslog_enable&3c0=0 net_syslog_server&3c0= net_debug_enable&3c0=0 net_debug_server&3c0= net_debug_level_ata&3c0=7 net_debug_level_sip&3c0=307 net_debug_level_mgcp&3c0=307 net_debug_level_net&3c0=7 net_debug_level_omc&3c0=7 net_debug_level_pmp&3c0=7 # System Identification ata_copyright_notice&12a0=ATA Ver 5.04 (C) 1994-2008 DKTCOMEGA ata_manufacturer&12a0=DKT ata_model_number&12a0=ATA2 ata_serial_number&12a0=3108 ata_hardware_revision&12a0=000 ata_boot_rom_revision&12a0=5.03 ata_firmware_revision&12a0=5.04 ata_configuration_revision&12a0=1.00.00 ata_processor_chip_id&1200= ata_processor_die_id&1200= net_hardware_mac_address&12a0= net_unique_device_id&12a0= #ata_processor_chip_id&1200=bf527 #ata_processor_die_id&1200=b0c090220b980c3989db2276c89d0000 #net_hardware_mac_address&12a0=00:50:c2:32:71:6c #net_unique_device_id&12a0=DKT_ATA_0050c232716c ata_system_info_1&300=...
  • Page 76 _voip_provider_2.subscription_domain_name&23fc= _voip_provider_2.resubscribe_interval&23fc=120 # VoIP Account 3 Information voip_provider_3&3dc= _voip_provider_3.provider_name&3fc= _voip_provider_3.provider_type&3fc=0 _voip_provider_3.distinctive_ring_type&3fc=0 _voip_provider_3.dialing_prefix&3dc= _voip_provider_3.preferred_audio_codecs&23fc= _voip_provider_3.incoming_mode&3d0=0 _voip_provider_3.group_line_1_enable&3d0=1 _voip_provider_3.group_line_2_enable&3d0=1 _voip_provider_3.use_outbound_proxy&3d0=0 DKTCOMEGA Fanoevej 6 _voip_provider_3.dns_lookup_mode&3d0=0 DK-4060 Kirke Saaby _voip_provider_3.display_name&23fc= +45 4646 2626 CPE User Guide v_04_07 Page - 76 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 77 # Audio Settings voip_preferred_audio_codecs&3e0=18 0 8 109 voip_silence_suppression_enable&3e0=0 voip_echo_canceller_enable&3e0=1 voip_echo_canceller_mode&3e0=2 voip_echo_canceller_tail_length&3e0=16 voip_fax_processing_mode&3e0=0 voip_dtmf_transmit_method&3e0=0 # RTP Protocol Parameters rtp_port_minimum&3e0=1234 DKTCOMEGA Fanoevej 6 rtp_port_maximum&3e0=65535 DK-4060 Kirke Saaby rtp_public_external_ip_address&3e0=0.0.0.0 +45 4646 2626 CPE User Guide v_04_07 Page - 77 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 78 # SIP Response Codes sip_response_code_sit1&3c0=0 sip_response_code_sit2&3c0=0 sip_response_code_sit3&3c0=0 sip_response_code_sit4&3c0=0 DKTCOMEGA Fanoevej 6 sip_response_code_try_backup&3c0=0 DK-4060 Kirke Saaby sip_response_code_retry_registration&3c0=30 +45 4646 2626 CPE User Guide v_04_07 Page - 78 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 79 # Timers ipbx_brief_pause_duration&3c0=50 ipbx_initial_dial_duration&3c0=1500 ipbx_warm_line_duration&3c0=400 ipbx_interdigit_duration&3c0=500 ipbx_dialing_duration&3c0=1000 ipbx_hangup_disconnect_duration&3c0=85 DKTCOMEGA Fanoevej 6 ipbx_hangup_silence_duration&3c0=1000 DK-4060 Kirke Saaby ipbx_pause_wait_duration&3c0=300 +45 4646 2626 CPE User Guide v_04_07 Page - 79 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 80 -6 0 985 -16 1428 -16 1777 -16 380 5 380 5 380 1000 DKTCOMEGA Fanoevej 6 ipbx_sit4_tone&3c0=3 -6 0 914 -16 1371 -16 1777 -16 380 5 380 DK-4060 Kirke Saaby 5 380 1000 +45 4646 2626 CPE User Guide v_04_07 Page - 80 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 81 # SLAC Configuration slac_port_impedance&3c0=0 slac_port_rx_gain&3c0=-3 slac_port_tx_gain&3c0=2 slac_audio_clamp_duration&3c0=100 slac_caller_id_type_1_mode&3c0=1 slac_caller_id_type_2_mode&3c0=1 slac_message_waiting_mode&3c0=1 slac_ring_type&3c0=0 slac_ring_frequency&3c0=25 slac_ring_transition&3c0=15 slac_ring_amplitude&3c0=85 slac_ring_bias&3c0=0 slac_message_waiting_type&3c0=0 slac_message_waiting_frequency&3c0=25 slac_message_waiting_transition&3c0=15 DKTCOMEGA Fanoevej 6 slac_message_waiting_amplitude&3c0=50 DK-4060 Kirke Saaby slac_message_waiting_bias&3c0=0 +45 4646 2626 CPE User Guide v_04_07 Page - 81 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 82 02,80,b3,4011,86,a2,5a,22,d4,1b,a1,cb,25,b3,2b,42,b5,ca,4060,9 6,3b,40a1,100 slac_impedance_commands_7&3c0=ca,40ed,98,3c,aa,32,ab,52,64,aa, a3,b2,40bc,9a,a2,ba,a6,9f,4001,8a,0,f0,14,b0,34,a2,32,ab,1c,54 ,e4,ac,24,40a5,88,15,10,b2,3c,1b,b3,bb,2d,3a,ce,33,40a5,82,0,4 002,80,b3,4011,86,42,5c,22,ac,1c,a2,c3,5a,a6,29,fa,9f,4a,40f0, 96,2e,4001,100 slac_impedance_commands_8&3c0=ca,40dd,98,db,a3,ba,32,36,a2,a9, f5,23,40ad,9a,53,b2,a6,1f,4001,8a,e,e0,14,20,be,2a,bb,2a,1b,cc ,a7,36,b3,405e,88,3a,10,48,75,d3,aa,32,b3,5a,2c,33,40a4,82,0,4 002,80,b3,4011,86,a2,53,32,4b,13,52,22,3b,b3,a2,42,b4,a2,4050, 96,a2,40a0,100 slac_impedance_commands_9&3c0=ca,40e2,98,ab,b1,ad,42,23,bb,a8, 7a,ca,40c3,9a,cb,a3,97,9f,4001,8a,3,f0,22,20,41,29,13,16,2b,c4 ,12,bd,1d,4097,88,3a,20,3d,c4,24,aa,15,43,13,bc,31,4036,82,0,4 002,80,b3,4011,86,b2,5a,22,c5,12,a1,e2,34,b4,c4,64,97,39,40f0, 96,2e,4001,100 DKTCOMEGA Fanoevej 6 slac_impedance_commands_10&3c0=ca,4008,98,23,aa,32,ab,a4,b4,7d DK-4060 Kirke Saaby ,a3,34,40ac,9a,a4,ba,57,9f,4001,8a,7d,d0,42,a0,23,14,41,bd,2d, +45 4646 2626 CPE User Guide v_04_07 Page - 82 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 83 # Operating Mode ipbx_mode&3f0=1 ipbx_voip_primary_provider_unavailable&3f0=0 ipbx_voip_no_provider_available&3f0=1 ipbx_pstn_not_available&3f0=2 ipbx_dial_direct&3f0=3 ipbx_dial_after_8&3f0=2 ipbx_dial_after_9&3f0=1 ipbx_dial_after_pound_8&3f0=3 ipbx_dial_after_pound_9&3f0=3 DKTCOMEGA Fanoevej 6 ipbx_dial_speed_dial&3f0=1 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 83 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 84 _ipbx_speed_dial_array_22&3df= _ipbx_speed_dial_array_23&3df= _ipbx_speed_dial_array_24&3df= _ipbx_speed_dial_array_25&3df= _ipbx_speed_dial_array_26&3df= _ipbx_speed_dial_array_27&3df= _ipbx_speed_dial_array_28&3df= _ipbx_speed_dial_array_29&3df= _ipbx_speed_dial_array_30&3df= ipbx_hot_warm_dial_string&3d3= # Call Forwarding ipbx_call_forward_enable&3df=0 ipbx_busy_forward_enable&3df=0 ipbx_no_answer_forward_enable&3df=0 ipbx_priority_forward_enable&3df=0 DKTCOMEGA Fanoevej 6 ipbx_call_forward_dial_string&3df= DK-4060 Kirke Saaby ipbx_busy_forward_dial_string&3df= +45 4646 2626 CPE User Guide v_04_07 Page - 84 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 85 # Distinctive Ringing ipbx_distinctive_ring_enable&3df=1 ipbx_distinctive_ring_list_&3df= _ipbx_distinctive_ring_list_1&3df= _ipbx_distinctive_ring_list_2&3df= _ipbx_distinctive_ring_list_3&3df= _ipbx_distinctive_ring_list_4&3df= _ipbx_distinctive_ring_list_5&3df= _ipbx_distinctive_ring_list_6&3df= _ipbx_distinctive_ring_list_7&3df= _ipbx_distinctive_ring_list_8&3df= _ipbx_distinctive_ring_list_9&3df= _ipbx_distinctive_ring_list_10&3df= _ipbx_distinctive_ring_list_11&3df= _ipbx_distinctive_ring_list_12&3df= _ipbx_distinctive_ring_list_13&3df= _ipbx_distinctive_ring_list_14&3df= DKTCOMEGA Fanoevej 6 _ipbx_distinctive_ring_list_15&3df= DK-4060 Kirke Saaby _ipbx_distinctive_ring_list_16&3df= +45 4646 2626 CPE User Guide v_04_07 Page - 85 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 86 _ipbx_disturb_accept_list_18&3df= _ipbx_disturb_accept_list_19&3df= _ipbx_disturb_accept_list_20&3df= _ipbx_disturb_accept_list_21&3df= _ipbx_disturb_accept_list_22&3df= _ipbx_disturb_accept_list_23&3df= _ipbx_disturb_accept_list_24&3df= _ipbx_disturb_accept_list_25&3df= _ipbx_disturb_accept_list_26&3df= _ipbx_disturb_accept_list_27&3df= _ipbx_disturb_accept_list_28&3df= _ipbx_disturb_accept_list_29&3df= _ipbx_disturb_accept_list_30&3df= # Call Blocking ipbx_block_anonymous_enable&3df=0 DKTCOMEGA Fanoevej 6 ipbx_blocked_number_enable&3df=0 DK-4060 Kirke Saaby ipbx_blocked_number_list_&3df= +45 4646 2626 CPE User Guide v_04_07 Page - 86 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 87 _ipbx_outgoing_block_list_1&3df= _ipbx_outgoing_block_list_2&3df= _ipbx_outgoing_block_list_3&3df= _ipbx_outgoing_block_list_4&3df= _ipbx_outgoing_block_list_5&3df= _ipbx_outgoing_block_list_6&3df= _ipbx_outgoing_block_list_7&3df= _ipbx_outgoing_block_list_8&3df= _ipbx_outgoing_block_list_9&3df= _ipbx_outgoing_block_list_10&3df= _ipbx_outgoing_block_list_11&3df= _ipbx_outgoing_block_list_12&3df= _ipbx_outgoing_block_list_13&3df= _ipbx_outgoing_block_list_14&3df= _ipbx_outgoing_block_list_15&3df= _ipbx_outgoing_block_list_16&3df= _ipbx_outgoing_block_list_17&3df= DKTCOMEGA Fanoevej 6 _ipbx_outgoing_block_list_18&3df= DK-4060 Kirke Saaby _ipbx_outgoing_block_list_19&3df= +45 4646 2626 CPE User Guide v_04_07 Page - 87 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 88 DKTCOMEGA Fanoevej 6 ipbx_fc_block_anonymous_disable&3e0=87 DK-4060 Kirke Saaby ipbx_fc_hookflash_simulation&3e0=88 +45 4646 2626 CPE User Guide v_04_07 Page - 88 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 89 DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 89 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

  • Page 90: Appendix 2 - Wifi Configuration File

    IPPortFilterEnable=0 IPPortFilterRules= PortForwardEnable=0 DKTCOMEGA PortForwardRules= Fanoevej 6 DK-4060 Kirke Saaby MacFilterEnable=0 +45 4646 2626 CPE User Guide v_04_07 Page - 90 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 91 WmmCapable=1;1;1;1 APAifsn=3;7;1;1 APCwmin=4;4;3;2 APCwmax=6;10;4;3 APTxop=0;0;94;47 APACM=0;0;0;0 BSSAifsn=3;7;2;2 BSSCwmin=4;4;3;2 BSSCwmax=10;10;4;3 BSSTxop=0;0;94;47 BSSACM=0;0;0;0 AckPolicy=0;0;0;0 APSDCapable=0 DLSCapable=0 NoForwarding=0;0;0;0 NoForwardingBTNBSSID=0 HideSSID=0;0;0;0 DKTCOMEGA Fanoevej 6 ShortSlot=1 DK-4060 Kirke Saaby AutoChannelSelect=0 +45 4646 2626 CPE User Guide v_04_07 Page - 91 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 92 Key1Str1= Key2Type=0;0;0;0 Key2Str1= Key3Type=0;0;0;0 Key3Str1= Key4Type=0;0;0;0 Key4Str1= HSCounter=0 HT_HTC=1 HT_RDG=1 HT_LinkAdapt=0 HT_OpMode=0 HT_MpduDensity=5 HT_EXTCHA=1 HT_BW=1 HT_AutoBA=1 HT_BADecline=0 DKTCOMEGA Fanoevej 6 HT_AMSDU=0 DK-4060 Kirke Saaby HT_BAWinSize=64 +45 4646 2626 CPE User Guide v_04_07 Page - 92 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 93 RemoteManagement=1 WAN_MAC_ADDR=00:0C:43:30:50:66 RFICType=5 TXPath=5 RXPath=1 SSID2=DKTCOMEGA2 SSID3=DKTCOMEGA3 SSID4=DKTCOMEGA4 WPAPSK2=12345678 Key1Str2= Key2Str2= Key3Str2= Key4Str2= WPAPSK3=12345678 Key1Str3= Key2Str3= Key3Str3= DKTCOMEGA Fanoevej 6 Key4Str3= DK-4060 Kirke Saaby WPAPSK4=12345678 +45 4646 2626 CPE User Guide v_04_07 Page - 93 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...
  • Page 94 Key1Str4= Key2Str4= Key3Str4= Key4Str4= FixedTxMode=HT;HT;HT;HT MNGVLANID= DKTCOMEGA Fanoevej 6 DK-4060 Kirke Saaby +45 4646 2626 CPE User Guide v_04_07 Page - 94 +45 4646 2625 mail@dktcomega.com www.dktcomega.com...

Table of Contents