Changing The Plotter Scale; Using Pan N Scan - Magellan GSC 100 User Manual

Satellite communicator

Table of Contents

Changing the Plotter Scale

While in the PLOT screen, press the LEFT/RIGHT

ARROWs to adjust the scale. The plot scale is shown at the

bottom right corner of the screen.

Using PAN N SCAN

The PLOT screen is equipped with a PAN N SCAN feature that

allows you to access waypoint information by positioning the

cursor over the waypoint.

From the PLOT screen, press MNU

to access the pop-up menu. You

will notice that this menu is

different from the pop-up menu

accessed from other screens in that

it has an additional feature, PAN N

SCAN.

Using the UP/DOWN ARROWs, highlight PAN N SCAN and

press ENTER.

The PAN N SCAN screen is similar

to the PLOT screen, however a

vertical and horizontal line cross to

form a cursor. The bearing (BRG)

and distance (DST) from your

present position to the cursor are

displayed at the top of the screen.

Use the UP/DOWN and LEFT/

RIGHT ARROWs to move the

cursor anywhere on the screen or to

scroll off the screen to view

portions of the active route not

currently shown on the screen.

Magellan GSC 100 Global Satellite Communicator

SAVE POS

CREATE WPT

ROUTE MENU

CONTRAST

PAN N SCAN

SYS MODE

G P

P A N N S C A N

T O

F I S H

B R G

202

D S T

NAV

PLOT

GOTO

G P

T O

D O C K