Step 5 : Setting The Clock - Sony SLV-N88 Operating Instructions Manual

Step 5 : Setting the clock
Using the Auto Clock Set
feature
Some TV and cable channels transmit time
signals with their broadcasts. Your VCR can
pick up this time signal to automatically set
the clock.
The Auto Clock Set feature works only if a
channel in your area is broadcasting a time
signal. If broadcasters in your area are not
yet sending time signals, set the time
manually (page 21).
Before you start.. .
l
Turn on the VCR and the TV When using
a cable box, turn it on.
l
Set the CH switch on the rear of the VCR
to 3 or 4, whichever channel is not used in
your area. If both are used, set the switch
to either channel (page 60). If your TV is
connected to the VCR using AfV
connections, set the TV to video input.
l
Press TV/VIDEO to display the VIDEO
indicator (or the VCR indicator for SLV-
N77 and SLV-N55) in the VCR's display
window.
1
MENU
Press MENU.
0
P
- MENU
- tI+IcII)
OK
Press t/+ to move the cursor (F) to "Clock
set," then press OK.
18
Setting the clock