Linksys E2500 Configuration Manual page 10

Linksys® E2500 Wireless-N Router Configuration Guide
From the Basic Setup page, open the DHCP Reservation Table by pressing the DHCP
Reservation button.
The DHCP Reservation table is displayed as shown below:
If you do not see an IPG100 in the top part of the table, then it has not requested an address
from the DHCP Server. Ensure that DHCP is set to Yes in the device configuration of the
IPG100 (refer to the IPG100 manual).
Carefully copy the Client Name and MAC Address for the IPG100 from the top table to the
second table. Set the assigned IP Address for the IPG100 to 192.168.1.3.
Page 10 Revision 1.0