Suunto AMBIT2 User Manual page 105

○ Off: The backlight is not switched on by pressing a button or when the
alarm sounds.
○ Night: The backlight is switched on for a few seconds when you press
any button and when the alarm sounds. Using the Night mode
significantly reduces battery duration.
○ Toggle: The backlight is switched on when you press [Light Lock]. It
stays on until you press [Light Lock] again.
Brightness: Adjust backlight brightness (in percentages).
● Display contrast: Adjust the display contrast (in percentages).
Compass
● Calibration: Start compass calibration.
● Declination: Set the compass declination value.
Map
● Orientation
○ Heading up: Displays the zoomed-in map with the heading pointing
up.
○ North up: Displays the zoomed-in map with the north pointing up.
settings
ALTI-BARO
● FusedAlti: Set FusedAlti on/off.
● Profile: altimeter, barometer, automatic
● Reference: altitude, sea level
settings
PAIR
● Bike PODs: Pair a Bike POD.
● Power POD: Pair a Power POD.
● HR belt: Pair a HR belt.
en
105